Aviom A-16II ユーザーズマニュアル

24

selected Channel alone without disturbing the rest of the mix. Two types of 

Solo mode are available; one functions on a channel by channel basis, the 

other (called Held Solo) remains in force until the user exits it.

Solo mode works on the currently selected Channel or Group. To use Solo 

mode, first select the Channel you want to hear alone. Its red button LED 

should be lit. Now press the 

 button, found in the pair of buttons in the 

upper right corner of the Personal Mixer. The Channel is now heard solo. 

You can make changes to volume and panning when a Channel is in Solo 

mode. All changes happen immediately. Consider Solo mode as a tempo-

rary state only. You cannot save a Preset with a Channel in Solo mode.

Only one Channel, linked pair (or Group) can be in solo at a time. To exit 

Solo mode, simply select another Channel or press the 

 button again 

to exit. 

To select a different Channel for auditioning in Solo mode, remember that 

you must first select a Channel and then press the 

 button to enter Solo 

mode.

This Solo mode allows Channels to be soloed in succession without exiting 

the Solo Mode. This is in addition to the regular Solo Mode behavior that 

allows the user to exit Solo Mode by pressing any other interface button 

after soloing a Channel. Held Solo Mode is indicated by the flashing of the 

Solo LED.

To use Held Solo Mode, you must start from Mix Mode (that is, no Chan-

nels are currently soloed). The Recall, Group, and Solo LED’s should be 

off.

To use Held Solo Mode:

• Press and hold the 

 button. 

• While holding down the 

 button, press and then release 

any Channel button. 

• You can now release the 

 button. (If you release the 

 button before releasing the Channel button, Held Solo 

Mode will not be engaged.)

• The Channel that you pressed is now soloed, and the Solo 

LED is flashing.

• To solo another Channel, press any other Channel button. 
• To exit Held Solo Mode, press the 

 button again. 

You can also exit Held Solo Mode by pressing the 

, 

, or 

buttons.