Aviom A-16II ユーザーズマニュアル

29

Remember that although you have edited and saved changes to your Group, 

you must still save the Preset if you want to recall the Preset with the new 

Group configuration intact.

Groups can be muted if necessary while creating a mix or editing. The 

procedure is the same as for muting a single Channel. To mute a Group: 

•  First select one of the Channels that is part of the Group.
•  The upper (red) LED in each Channel button that is part of a 

Group will be lit solid. 

•  To mute the Group, simply press the 

 button. 

•  The lower (yellow) LEDs in all Channel buttons contained 

in the Group will light, indicating that the Channels are now 

muted. 

•  Unmute the Group by pressing the 

 button again while 

the Group is still selected.

Note: The mute status of your Groups is saved as part of a Preset.

 

The Global Trim function can be used to lower all sixteen audio levels 

in a mix simultaneously, which is useful when some of the channels are 

nearing maximum level and additional mix balance changes are required. 

This function operates in a similar manner to a studio mixing console with 

automation; invoking the command calculates a new volume level for all 

channels. 

The Global Trim function drops the level of the mix by 6dB with each 

use, keeping the relative levels intact among the sixteen audio channels. 

Changes to volume levels are instantly updated and can be seen on the 

volume LED readout as each channel is selected. Note that as channels ap-

proach their minimum volume level that the mix balance will change since 

the A-16II has no way of re-balancing the mix once the minimum level for a 

channel has been reached.

The Trim function is labeled on the A-16II front panel, once near the 

button and once near the 

 button to indicate the button combination 

used to perform the Global Trim.

To Use the Global Trim function:

• Hold the 

 button down.