Korg AX3000G ユーザーズマニュアル

 

9

 

This switch controls an effect. For each program, you can assign what effect 
parameter this switch will control. For details, refer to “Control switch settings” 
on p.43.

 

This controls volume, wah, or another effect parameter. For each program, you 
can assign just what this pedal will control (p.40). When using ESS, manual 
control of the sequence speed or step is assigned to this pedal. By advancing 
this pedal forward to press the switch that’s mounted under it, you can turn the 
expression pedal or the effect being controlled by ESS on/off. (This switching 
operation is not available if the EXP pedal is controlling the volume.)

 

When you’re using ESS, this indicates the total number of steps (LED: green) 
and the current step (LED: red). When you’re using the expression pedal, this 
indicates the current position of the pedal (LED: red). When the Tuner is oper-
ating, this functions as a tuning meter (LED: red or green).

 

What happens when you change programs will depend on the target that’s 

assigned to the expression pedal, as follows.
If the expression pedal is assigned to VOLUME, DELAY INPUT, or REVERB 
INPUT, or if it is assigned to the same target as in the previous program, the pedal 
position will be valid immediately after the program change, and the pedal indicator 
will light.
In other cases, the value specified within the program will be valid immediately 
after the program change, and the pedal indicator will be dark until you move the 
pedal.