Roland V-Synth ユーザーズマニュアル

Adjusts the overall volume that is output from the rear panel MAIN 
OUT jacks and PHONES jack.

→

 (Quick Start; p. 4)

This will light when the input volume is too high.

Adjusts the volume of the signal input through the INPUT jacks on 
the rear panel. 

→

You can apply a variety of effects to sounds simply by moving your 
hand. 

→

If the D Beam controller is on, these will light when you move your 
hand over the controller.

Switches the D Beam controller on/off. The effect to be controlled 
can be selected by pressing the relevant button.

 Apply the Time Trip effect.

 Apply the Time Control effect.

 Apply the Pitch Control effect.

 Apply the effect that is specified for each sound.

By touching the pad surface with your finger you can apply a variety 
of effects to the sound.

This will light when you touch the Time Trip Pad.

Switches to the Time Trip effect.

Switches to the effect that is specified for each patch.

Switches hold on/off for the effect controlled by the Time Trip pad.

Enables or disables control of an externally connected V-LINK 
device.

You can assign a variety of parameters and functions to the two 
knobs ([C1], [C2]), and use them to modify the sound in realtime. 

→

Here you can control the arpeggiator.

Adjusts the tempo of the arpeggios.

Switches the Arpeggiator on/off.

Switches the Arpeggiator hold on/off.