Radio Shack 42-4058 ユーザーズマニュアル

Using SP

2. Repeatedly press

–

or enter a

number using the number buttons to
select the equalizer type you want.

The equalizer type (

IjWdZWhZ

8Wii!

Jh[Xb[!

BekZd[ii

C[bbem

8h_]^j

HeYa

:WdY[

@Wpp

, or

9bWii_Y

) appears. The bar

graph on the display shows the
frequency response of the type that
appears.

Press

(

EXIT

) or

EQUALIZER

to exit the

equalizer setting screen.

&,756+0)

6*'

)

#+0

1. After selecting the equalizer type, press

(

ENTER

2. Repeatedly press

(

CURSOR

) to

select the band you want to adjust (

Bem

C_ZBem

C_Z>_]^

, or

>_]^

). The bar

graphs for the corresponding frequency
range flash.

3. Repeatedly press

–

or enter a

number using the number buttons to
make the adjustment for the band you
want. You can adjust within the range of
–12 to +12. The bar graphs change in
magnitude as you adjust.

4. Press

(

EXIT

) to return to the equalizer

type selection screen, then press

EQUALIZER

to exit the equalizer mode.

75+0)52.+6

The SPLIT feature lets you play two different
tones on opposite ends of the keyboard, so
the low-end keys play one tone, and the
high-end keys play another. The main tone
sounds in Channel 1 and the split tone
sounds in Channel 3. You can use the mixer
function to change the volume or other
settings in each channel. See “Using the
Mixer” on Page 12. You can change the split
point at any time.

1. Press

TONE.

2. Use the number buttons to enter the

three-digit number for the tone you want
the high-end keys to play.

3. Press

SPLIT

. The SPLIT indicator

appears.

4. Enter the three-digit number for the

tone you want the low-end keys to play.

5. Hold down

SPLIT

, and press the key

where you want the high-end tones to
begin. The selected key’s name
appears.

For example, if you set the split point to
be F below middle C,

appears.

6. Play both the low and high-end keys to

hear the selected split tones.

To select a different low-end tone, enter
the three-digit number for the new low-
end tone while the SPLIT indicator
appears.

To select a different high-end tone,
press

SPLIT

to turn off its indicator, then

enter the three-digit number for the new
high-end tone. Then press

SPLIT

again

so the SPLIT indicator appears.

To cancel SPLIT, repeatedly press

SPLIT

until its indicator disappears.

75+0).#;'4

The keyboard lets you play two different
preset tones at the same time, creating a
“layered” effect when you press one key.
The first tone you select is called the

base

tone and the second tone is called the layer
tone.

1. Press

TONE

2. Enter the three-digit number for the

base tone then press

LAYER

. The

LAYER indicator appears.

3. Enter the three-digit number for the

layer tone.

4. Play the keyboard to hear the selected

layered tones.

To select a different layer tone, enter
the three-digit number for the new layer
tone while the LAYER indicator
appears.

To select a different base tone, press

LAYER

to turn off its indicator, then enter

the three-digit number for the new base
tone. Then press

LAYER

again so the

LAYER indicator appears.

To cancel LAYER, repeatedly press

LAYER

until its indicator disappears.

75+0)52.+6#0&.#;'461)'6*'4

You can combine the split and layer
features, so you can play one layered
combination of tones on the low-end keys
and another on the high-end keys.

1. If the SPLIT or LAYER indicator is on,

press

SPLIT

LAYER

to turn it off.

2. Enter the number for the high-end base

tone on the keypad.

016'

Adjusting the Gain

Gain settings apply only to the current
equalizer type. When you change the
equalizer type, the default gain settings for the
newly selected equalizer type take effect.

Using Split

•

If SPLIT is on when you turn off the
keyboard, it remains on the next time you
turn the keyboard back on.

•

When you turn on SPLIT, the last selected
settings appear.

•

When you select Concert Chord or
Fingered auto accompaniment, the
accompaniment keyboard range is shifted
to the split point you set.

Using Layer

•

If LAYER is on when you turn off the
keyboard, LAYER will still be on the next
time you turn on the keyboard.

•

When you turn on LAYER, the previous
tone settings appear.