Roland FC-300 ユーザーズマニュアル

 

This sets the range for values that are transmitted.

 

fig.05-009

 

This sets the switch mode.

 

fig.05-009

 

This selects whether or not the AMP CONTROL jack is to be controlled.

 

fig.05-009

 

When the AMP Ctl Op parameter is set to ON and the AMP Polarity parameter is set 
to Normal, control of AMP CONTROL with the pedal functions as shown below.

 

fig.05-00fig.05-009

 

The top screen appears.

 

LATCH

The ON and OFF will alternate each time you press the pedal.

MOMENTARY

The value will be ON while you press the pedal, and OFF when you re-
lease the pedal.

Minimum

Maximum

The Range parameter is 
enabled when CC#, P.BEND, 
or CH.PRS is selected for the 
expression pedal.

The Mode parameter and AMP 
Ctl Op parameter are enabled 
when a control pedal or other 
switch function is selected.

AMP CONTROL

1 jack

AMP CONTROL

2 jack

When the pedal is OFF

When the pedal is ON

Open

Guitar Amp

(amps channel switching jack)

(AMP CONTROL jack)

Guitar Amp

(amps channel switching jack)

(AMP CONTROL jack)

Closed

The settings made for the 
pedals are lost when the pedal 
settings are switched. To save 
settings made for the pedals, 
save them as pedal settings. 
For more detailed information, 
see “Storing Controller 
Numbers Assigned to the 

You can change the polarity of 
the AMP CONTROL jacks. For 
more detailed information, see 
“Setting the Polarity of the 

FC-300_e1.book 25 ページ ２００７年４月２４日　火曜日　午前１０時１０分