Creative E-MU ユーザーズマニュアル

Back Panel Description

Xboard

23

This jack accepts either a footswitch or continuously variable footpedal. The 
default setting is for a footswitch. To use a footpedal, see 

Footswitch - Accepts either a normally-open or normally-closed momentary 
footswitch. The Xboard auto-senses the polarity on power-up.
Footpedal - Accepts most standard footpedal types with a stereo plug. See the 
wiring diagram shown on 

 for pedal wiring specifications.

Outputs note and controller MIDI data from the Xboard. This jack can also be 
used as a MIDI interface from a computer software application. See 

Use a standard MIDI cable to connect the Xboard to the MIDI input jack of 
other MIDI devices.

Connects Xboard to your computer via the supplied USB cable. The USB 
connection provides two-way communication when connected to the 
computer and also supplies power to the Xboard. Always connect to the USB 
jack on the computer itself and NOT to a low-power USB connection that 
may be present on your computer keyboard or other USB peripheral.

This jack allows the Xboard to be powered from a standard 6VDC Adapter 
(positive tip) when not connected to the computer via USB.

This switch turns the Xboard on or off whether powered via USB, AC Adapter, 
or batteries.

X Board.book  Page 23  Wednesday, April 12, 2006  10:44 AM