Tascam DP-008 ユーザーズマニュアル

Tascam

20

TASCAM DP-008

if the input setting is Internal MIC / High,

change it to Internal MIC / Low. If the OL

indicator continues to light even when set to

Internal MIC / Low, move the sound source

away from the mic or lower the volume at

the sound source.

CAUTION

Always monitor through headphones

when using a mic. If you monitor through

speakers, feedback could occur.

6 Return to the beginning of the song and

begin playback. Sing along with the

already recorded rhythm and lead guitar

parts.

You can hear the playback of

TRACK

1

and

TRACK 2

as well your singing

through the headphones.

7 Use the

TRACK 1

and

TRACK 2

LEVEL

and

PAN

knobs,

MASTER LEVEL

knob

and

VOLUME

dial to adjust the output

volume and the balance between the

tracks.

8 Return to the start of the track again

and press the playback (Á) key while

pressing and holding the record (–) key

to start recording. The

TRACK 3

REC

key

stops blinking and stays lit constantly.

You are recording again. Sing!

9 When you are finished, press the stop

(ª) key to stop recording.

10 Press the

TRACK 3

REC

key again. Its

light turns off.

Mixing the tracks

After you finish recording, the next step is to

make a stereo mix.
1 Use the

LEVEL

knobs for

TRACK 1

,

2

and

3

, to adjust the levels of the tracks

and the balance between them. Use

the

MASTER LEVEL

knob to adjust the

overall level.

2 Use the track

PAN

knobs to adjust the

stereo positioning of the tracks.

Watch the

L

and

R

meters at the right

side of the display as you adjust levels

and panning.

Mastering the mix

Now we will record your stereo mix. We call

this process mastering.
The time between the song’s beginning

(00:00:00:00) and the OUT point will be

recorded as the stereo master track. So, first we

must set the OUT (end) point.
1 Press the

IN/OUT

key to open the

I/O

SETTING

screen.

2 – Quick Start Guides