Tascam DP-008 ユーザーズマニュアル

TASCAM DP-008

If you turn the unit’s power ON after making

the USB connection, the screen above appears

right away.
The unit appears as an external drive named

“DP-008” on the computer’s display.
The FAT partition of the TASCAM DP-008

has three directories (folders): BACKUP,

WAVE and UTILITY.

CAUTION

This unit can receive power from

•

batteries or an AC adaptor. It cannot be

•

tories (folder) in “DP-008”.
The total number of files and folders that

•

this unit can recognize on a FAT partition

is 100. If the number exceeds 100, use a

computer or other device to move them.
Do not make a USB connection when the

•

remaining battery level is low.
If the power turns OFF during data

•

transfer, all the data will be lost. This lost

data cannot be restored.

NOTE

Confirm that you have copied all the files

•

that you want to transfer to a computer

to the FAT partition before connecting

the unit and the computer by USB.
The UTILITY directory is used to, for

•

example, update the system software

used by the unit. Please see the instruc-

tions included with the software update

for how to update.

Disconnecting

Use the following procedures to disconnect the

USB connection correctly.

NOTE

When disconnecting from a computer, the

procedure on the computer might be called

“eject” or “unmount.”

CAUTION

When transferring data, do not disconnect

the unit or remove the USB cable. Doing so

could cause data on the computer or this

unit to be damaged.

Disconnecting from Windows XP/

Windows Vista/Windows 7

Follow the procedures below to disconnect

computers that use Windows XP, Windows

Vista, or Windows 7 operating systems.
A PC card icon and arrow appear in the taskbar

(usually at the bottom right of the screen).

1 Left-click on this icon to open a pop-up

bar. Click this pop-up bar to disconnect

this unit from the computer.

2 After a message appears on the computer

screen saying that this unit can be dis-

connected, remove the USB cable.
This unit restarts and the Home Screen

appears on the display.

If a message appears on the computer

•

screen saying that this unit cannot be

disconnected safely, do not disconnect

the USB cable. Close all the computer

programs and windows that are accessing

files on this unit, and then try the operation

again.

Disconnecting from Macintosh

systems

1 Drag the “DP-008” icon that repre-

sents this unit to the Trash, or type

Command-E to eject the DP-008.

TIP

Depending on the OS version or OS

settings you might also be able to eject the

“DP-008” icon by clicking an eject button

next to it in the Finder window or by using a

control key.

11 – Exchanging Data with a Computer