Roland S-1608 ユーザーズマニュアル
4—Panel Descriptions
22
S-1608/S-0816 Digital Snake Owner’s Manual
S-4000R Front Panel
fig.4-05.eps
1—Signal Status Indicators
These indicator lights show signal status for each of the S-1608/S-0816 System’s 24 input channels.
•
CLIP—lights red when the input signal exceeds 0 dB (after A/D conversion). Once a CLIP
indicator lights, it stays lit until cleared with the [CLIP CLEAR / ENTER] button.
indicator lights, it stays lit until cleared with the [CLIP CLEAR / ENTER] button.
•
SIG—lights green when the input signal level is greater than -40 dB (after A/D conversion).
2—Memory Buttons ([RECALL] Button/ [STORE] Button)
The S-4000R provides ten memory presets for storing S-1608/S-0816 System’s input channel settings.
Use the [RECALL] and [STORE] buttons to recall and store settings.
Use the [RECALL] and [STORE] buttons to recall and store settings.
3—[CHANNEL] Knob and CHANNEL Display
Use the [CHANNEL] knob to select an input channel for editing or signal level monitoring. The
currently selected channel is shown in the CHANNEL display.
currently selected channel is shown in the CHANNEL display.
The [CHANNEL] knob and CHANNEL display are also used to select memory presets and link odd/even
channel pairs (Stereo Link function).
channel pairs (Stereo Link function).
S-4000R Remote Controller
The S-4000R was designed to also be used as a remote controller for the S-4000 systems (S-4000S or
S-4000H). Accordingly, there are 40 CLIP and SIG indicators. When using an S-1608/S-0816 system,
only channels 1 to 24 are enabled.
Please see the S-4000S Owner’s Manual when using an S-4000 system.
S-4000H). Accordingly, there are 40 CLIP and SIG indicators. When using an S-1608/S-0816 system,
only channels 1 to 24 are enabled.
Please see the S-4000S Owner’s Manual when using an S-4000 system.
S-1608_e.book 22 ページ 2007年4月23日 月曜日 午後12時57分