Roland S-1608 ユーザーズマニュアル
6—Using the S-1608/S-0816 System
S-1608/S-0816 Digital Snake Owner’s Manual
39
Setting the [REAC MODE] Switches
fig.6-16.eps
The [REAC MODE] switch on the S-1608/S-0816 is recessed from the
front panel so that its setting can’t be changed inadvertently. To change
the switch setting, use a blunt-tipped instrument such as a ball-point pen,
mechanical pencil, etc.
front panel so that its setting can’t be changed inadvertently. To change
the switch setting, use a blunt-tipped instrument such as a ball-point pen,
mechanical pencil, etc.
With their power off, set the units as follows:
1.
On the S-1608, set the [REAC MODE] switch to M.
2.
On the S-0816, set the [REAC MODE] switch to S.
If the [REAC MODE] switch setting is changed when the unit is powered on, the new setting won’t
take effect until the unit is powered off and then back on again.
take effect until the unit is powered off and then back on again.
S-1608_e.book 39 ページ 2007年4月23日 月曜日 午後12時57分