Roland LVS-800 ユーザーズマニュアル

Menu List

MIDI Setup Menu

These settings are required when operating the unit by remote control.

fig.MIDI-menu.eps

Utility Menu

fig.Utility-menu.eps

*1 When Memory Protect is on, PANEL PRESET settings can be called up, but setting values cannot be changed or saved. It also becomes impossible

to change the setting values for any menu items.

*2 The settings for other items persist in memory after the power is switched off, but the on/off setting for color-bar output is not saved.

MENU

MIDI Setup

MIDI Channel

This sets the MIDI send and receive channel.

MIDI Out/Thru Switch

This determines whether output is passed through unchanged.

Device ID

This sets the MIDI device ID.

Input A-BUS Assign

This sets the input selection message for Bus A.

Input B-BUS Assign

This sets the input selection message for Bus B.

Video Fader Assign

This sets the message for video fader operation.

A/B Transition Assign

This sets the message for A/B transition effect selection.

DSK Background Assign

This sets the message for DSK background channel selection.

DSK Foreground Assign

This sets the message for DSK foreground channel selection.

DSK Fader Assign

This sets the message for DSK fader operation.

DSK Transition Assign

This sets the message for DSK transition effect selection.

DSK Key Level Assign

This sets the message for DSK key-level adjustment.

PGM Output Fade Assign

This sets the message for OUTPUT FADE operation.

Transition Time Assign

This sets the message for adjusting the transition time.

Panel Preset Assign

This sets the message for PANEL PRESET operation.

MIDI Reset

This returns the MIDI settings to factory-default state.

PinP Assign

This sets the message for PinP selection.

MENU

Utility

Memory Protect

This turns Memory Protect on or off. *1

Video Sync Threshold

This raises or lowers sensitivity for video-input synchronization signals.

Video Fader Calibrate A

This performs calibration of video fader on Bus A side.

Video Fader Calibrate B

This performs calibration of video fader on Bus B side.

Input Select Delay Time

This sets the transition time when performing a transition through button operation.

No Signal Blueback

This turns blueback output on or off when a channel having no input is selected.

Color Bar Out

This turns color-bar output on or off. *2

Utility Reset

This returns the Utility-menu settings to factory-default state.

NTSC/PAL

This switches between NTSC and PAL.