Rolls SX45 プリント

NOTE: This manual assumes the user has a basic knowledge of 

audio electronic components and connections.

Shown below is an example connection diagram for the SX45; a 

stereo line-level input to stereo low and high level outputs, along 

with a subwoofer output.

Connect the Inputs of the SX45 to the output of a mixer or other 

device containing the stereo signal to be divided. This signal should 

be Line-Level, or reference 0 to +4 dB. The High and Low Outputs 

should be connected to the proper amplifier and speaker combina-

tion. Check speaker specifications to ensure that the speakers are 

receiving the proper frequencies.

Set all SX45 Levels to zero. Begin by applying signal from the 

mixer/signal source to the SX45. Carefully increase the Input Level 

until you see the Clip LED begin to blink. Slightly reduce the Input 

Level from this point. This should insure a proper input signal level 

without clipping, therby giving you the best noise performance.

Set your amplifiers to their normal operating level (many amplifiers 

are simply set at their full volume level). Carefully begin increasing 

the SX45 High and Low Level controls until you reach a desired 

and balanced volume level.