Korg Triton Studio ユーザーズマニュアル
126
For each track, you can specify the status of the internal tone
generator and the scale.
generator and the scale.
1–1: Status 1–8
(Status/Scale T01–08)
1–2: Status 9–16
(Status/Scale T 09–16)
1–1(2)a: Status
Status
[INT, Off, BTH, EXT]
Specifies whether each track will transmit/receive MIDI
data and/or sound the internal tone generator.
data and/or sound the internal tone generator.
INT:
When you playback the musical data of this track, or
operate the TRITON STUDIO’s keyboard or controllers
when “Play (Track Select)” (0–1g) is set to a track whose set-
ting is INT, the TRITON STUDIO’s internal tone generator
will sound, but MIDI messages will not be transmitted to
external devices.
Off:
when “Play (Track Select)” (0–1g) is set to a track whose set-
ting is INT, the TRITON STUDIO’s internal tone generator
will sound, but MIDI messages will not be transmitted to
external devices.
Off:
The program will not sound, nor will MIDI messages
be transmitted.
BTH:
BTH:
The operations of both INT and EXT will occur. When
you play the musical data of this track, or operate the TRI-
TON STUDIO’s keyboard or controllers when “Play (Track
Select)” is set to a track whose setting is BTH, the TRITON
STUDIO’s internal tone generator will sound, and MIDI
messages will also be transmitted to external devices.
EXT:
TON STUDIO’s keyboard or controllers when “Play (Track
Select)” is set to a track whose setting is BTH, the TRITON
STUDIO’s internal tone generator will sound, and MIDI
messages will also be transmitted to external devices.
EXT:
When you playback the musical of this track, or oper-
ate the TRITON STUDIO’s keyboard or controllers when
“Play (Track Select)” is set to a track whose setting is EXT,
MIDI messages will be transmitted to external devices, but
the TRITON STUDIO’s internal tone generator will not
sound.
“Play (Track Select)” is set to a track whose setting is EXT,
MIDI messages will be transmitted to external devices, but
the TRITON STUDIO’s internal tone generator will not
sound.
1–1(2)b: Use Program’s Scale/Scale
Use Program’s Scale
[Off, On]
For each track you can specify whether or not the scale spec-
ified for the program in “Scale” (Program P1: 1–1c) will be
used.
ified for the program in “Scale” (Program P1: 1–1c) will be
used.
On (checked):
The scale specified by the program will be
used.
Off (unchecked):
Off (unchecked):
The scale specified by “Scale” (1–1b/2b)
will be used.
Scale:
Select the scale that will be used in Song Play mode.
Type
[Equal Temperament...User Octave Scale15]
Selects the scale type (
☞“Type” Program P1: 1–1c).
Key (Scale Key)
[C…B]
Selects the tonic key of the selected scale (
☞“Key” Program
P1: 1–1c).
Random
[0…7]
As this value is raised, an increasing amount of random
deviation will be applied to the pitch at note-on (
deviation will be applied to the pitch at note-on (
☞“Ran-
dom” Program P1: 1–1c).
1–3: MOSS 1–8
(MOSS Setup T01–08)
1–4: MOSS 9–16
(MOSS Setup T09–16)
This page is displayed only when the EXB-MOSS option has
been installed.
For details refer to the EXB-MOSS owner’s manual.
been installed.
For details refer to the EXB-MOSS owner’s manual.
Song Play P1: Track
Musical data
Keyboard and controller
operations
Keyboard and controller
operations
Received data
Status
Internal tone
generator
generator
MIDI OUT
Internal tone
generator
generator
MIDI OUT
INT
●
✕
●
—
EXT
✕
●
✕
—
BTH
●
●
●
—
0–1a
0–1b
0–3a
0–3a
0–1
1–1a
1–1b