Korg Triton Studio ユーザーズマニュアル

When “LFO Waveform” is set to Random, the “LFO Step Freq” 
parameter uses a random LFO cycle.

Offsetting the left and right phases alters how modulation is 
applied to the left and right channels, creating a swelling affect.

The width of an LFO step, or a cycle of random LFO, is obtained 
by multiplying the length of a note (

…) (selected for “Step Base 

Note”, in relation to the tempo specified in “BPM,” or the MIDI 
Clock tempo if “BPM” is set to MIDI) by the number specified in 
the “Times” parameter.

The effect sound’s phase will be reversed when you set this 
parameter in the range of values from –Wet to –1:99.

This effect is a combination of the Exciter, which adds a punch 
to the sound and the Enhancer, which adds spread and pres-
ence.

This parameter sets the depth (intensity) of the Exciter effect. Pos-
itive values give a frequency pattern (to be emphasized) different 
from negative values.

This parameter sets the frequency to be emphasized. Higher val-
ues will emphasize lower frequencies.

These parameters set the delay time for the Enhancer left and 
right channel. Specifying a slightly different delay time for the left 
and right channel will add a stereo image, depth, and width to the 
sound.

This effect adds very low frequencies to the input signal. It is 
very useful when simulating a roaring drum sound or 
emphasizing powerful low range. This effect is different from 
the equalizer in that you can add very low range harmonics. 
You can also adjust the oscillator frequency to match a partic-
ular note number, for use as an octaver.

a

Exciter Blend
Sets the intensity (depth) of the Exciter effect

–100...+100

☞

,

Src

Off...Tempo

Selects the modulation source of the Exciter intensity

Amt

–100...+100

Sets the modulation amount of the Exciter intensity

b

Emphatic Point
Sets the frequency to be emphasized

0...70

☞

,

Src

Off...Tempo

Selects the modulation source of the frequency to be emphasized

Amt

–70...+70

Sets the amount of modulation of the frequency to be emphasized

c

Enhancer Dly L (Enhancer Delay L) [msec]
Sets the delay time for the Enhancer left channel

0.0...50.0msec

☞

d

Enhancer Dly R (Enhancer Delay R) [msec]

0.0...50.0msec

Sets the delay time for the Enhancer right channel

☞

e

Enhancer Depth

0...100

Sets the determines to what degree the Enhancer effect is applied

Src

Off...Tempo

Selects the modulation source of the Enhancer width

Amt

–100...+100

Sets the modulation amount of the Enhancer width

f

EQ Trim
Sets the 2-band EQ input level

0...100

g

Pre LEQ Gain [dB]
Sets the gain of Low EQ

–15.0...+15.0dB

Pre HEQ Gain [dB]
Sets the gain of High EQ

–15.0...+15.0dB

h

Wet/Dry

Dry, 1:99...99:1, Wet

Src

Off...Tempo

Amt
Sets the modulation amount of the effect balance

–100...+100

a

OSC Mode

Note (Key Follow), Fixed

Determines whether the oscillator frequency follows the note number 
or whether it is fixed

☞

b

Note Interval

–48...0

Sets the pitch difference from the note number when OSC 
Mode=Note (Key Follow)

☞

Note Fine
Fine adjustment of the oscillator frequency

–100...+100

☞