Korg Triton Studio ユーザーズマニュアル

With the tempo specified by the “BPM” parameter (or the MIDI 
Clock tempo if “BPM” is set to MIDI), the length of one beat 
equals the feedback delay time, and the interval between taps 
becomes equal. Selecting a rhythm pattern will automatically turn 
the tap outputs on and off. When “BPM” is set to MIDI, the lower 
limit of the “BPM” is 44.

These effects simulate the ambience of reverberation in con-
cert halls.

This hall-type reverb simulates the reverberation of mid-size 
concert halls or ensemble halls.

This hall-type reverb simulates the reverberation of larger 
halls and stadiums, and creates a smooth release.

This plate reverb simulates warm (dense) reverberation.

This plate reverb simulates dry (light) reverberation.

The “Pre Delay” sets the delay time to the reverb input, allowing 
you to control spaciousness.
Using the “Pre Delay Thru” parameter, you can mix the dry sound 
without delay, emphasizing the attack of the sound.

e

High Damp [%]
Sets the damping amount in the high range

0...100%

☞

 Fx:043

Low Damp [%]
Sets the damping amount in the low range

0...100%

☞

 Fx:043

f

Input Level Dmod [%]

–100...+100

Sets the modulation amount of the input level

☞

 Fx:037,

 

Src
Selects the modulation source for the input level

Off...Tempo

☞

 Fx:037

g

Wet/Dry

Dry, 1:99...99:1, Wet

Src

Off...Tempo

Amt
Sets the modulation amount of the effect balance

–100...+100

a

Reverb Time [sec]
Sets the reverberation time

0.1...10.0sec

High Damp [%]
Sets the damping amount in the high range

0...100%

b

Pre Delay [msec]
Sets the delay time from the dry sound

0...200msec

☞

Pre Delay Thru [%]
Sets the mix ratio of non-delay sound

0...100%

☞

c

EQ Trim
Sets the EQ input level

0...100

d

Pre LEQ Gain [dB]
Sets the gain of Low EQ

–15...+15dB

Pre HEQ Gain [dB]
Sets the gain of High EQ

–15...+15dB

e

Wet/Dry

Dry, 1:99...99:1, Wet

Src

Off...Tempo

Amt
Sets the modulation amount of the effect balance

–100...+100

+