Korg Triton Studio ユーザーズマニュアル

Make settings for filter 2 which controls the sound of oscilla-
tor 2. You can choose either a 24 dB/octave low pass filter 
with resonance or a 12 dB/octave low pass filter and 12 dB/
octave high pass filter connected in series. Filter 2 can be 
used if “Oscillator Mode” (1–1a) is Double. (

☞”3–1: 

Filter1” – “3–4: Filter1 EG”)

Make settings for amp 1 which controls the volume of oscil-
lator 1, and amp 2 which controls the volume of oscillator 2.
Pan settings are also made here.

These parameters control the volume and pan of oscillator 1.

Sets the volume of oscillator 1.

The volume of a program can be controlled by CC#7 
(volume) and #11 (expression). The resulting level is 
determined by multiplying the values of CC#7 and #11. 
The Global MIDI channel “MIDI Channel” (Global P1: 
1–1a) is used for control.

Sets the pan (stereo location) of oscillator 1.
A setting of L001 places the sound at far left, C064 in the 
center, and R127 to far right.

The sound will be heard from a different location 

at each note-on.

This can be controlled by CC#10 (panpot). A CC#10 
value of 0 or 1 will place the sound at the far left, a 
value of 64 will place the sound at the location specified 
by the “Pan” setting for each oscillator, and a value of 
127 will place the sound at the far right. This is con-
trolled on the global MIDI channel “MIDI Channel” 
(Global P1: 1–1a).

This option is availble only when “Oscillator Mode” (1–1a) 
is set to Drums.

 The sound will be output at the “Pan” setting 

that has been made for each key of the drum kit (Global P5: 
5–2b). When “Oscillator Mode” is Drums, you will nor-
mally use this setting.
Off (unchecked):

 All keys of the Drum Kit will use the “Pan 

(Amp 1 Pan)” setting.

Selects the source that will modify pan (“AMS List” 
☞p.242). This change will be relative to the “Pan (Amp1 
Pan)” setting.

4–1

4–1a

4–1b