Korg Triton Studio ユーザーズマニュアル

Specifies the direction in which “AMS (Level Mod.AMS)” 
will change “Break (Break Point Level).” If “Intensity (AMS 
Intensity)

” is set to a positive (+) value, setting this parame-

ter to + will allow AMS to increase the EG level, and setting 
this parameter to – will allow AMS to decrease the EG level. 
With a setting of 0, no change will occur.

These parameters let you use an alternate modulation 
source to modify the amp 1 EG times that were specified in 
Amp1 EG (4–3a).

Selects the source that will control the Time parameters of 
the amp 1 EG (“AMS List” 

Specifies the depth and direction of the effect that “AMS1 
(Time Mod. AMS1)” will have.
For example if “AMS1 (Time Mod. AMS1)” is Amp KTrk +/
+

, the (Amp) Keyboard Track settings (4–2a) will control the 

EG Time parameters. With positive (+) values of this param-
eter, positive (+) values of Ramp will cause EG times to be 
lengthened, and negative (–) values of Ramp will cause EG 
times to be shortened. The direction of the change is speci-
fied by “At (AMS1 SW Attack),” “Dc (AMS1 SW Decay),” 
“Sl (AMS1 SW Slope),” and “Rl (AMS1 SW Release).”
When “AMS1 (Time Mod. AMS1)” is Velocity, positive (+) 
values

 will cause EG times to lengthen as you play more 

strongly, and negative (–) values will cause EG times to 
shorten as you play more strongly. With a setting of 0, the EG 
times will be as specified in Amp1 EG (4–3a).

Specifies the direction of the effect that “AMS1 (Time Mod. 
AMS1)” will have on “Attack (Attack Time).” With positive 
(+) values

 of “Intensity (AMS1 Intensity),” setting this 

parameter to + will allow AMS1 to lengthen the time, and 
setting it to – will allow AMS1 to shorten the time. With a 
setting of 0 there will be no effect.

Specifies the direction of the effect that “AMS1 (Time Mod. 
AMS1)” will have on “Decay (Decay Time).” With positive 
(+) values

 of “Intensity (AMS1 Intensity),” setting this 

parameter to + will allow AMS1 to lengthen the time, and 
setting it to – will allow AMS1 to shorten the time. With a 
setting of 0 there will be no effect.

Specifies the direction of the effect that “AMS1 (Time Mod. 
AMS1)” will have on “Slope (Slope Time).” With positive 
(+) values

 of “Intensity (AMS1 Intensity),” setting this 

parameter to + will allow AMS1 to lengthen the time, and 
setting it to – will allow AMS1 to shorten the time. With a 
setting of 0 there will be no effect.

Specifies the direction of the effect that “AMS1 (Time Mod. 
AMS1)” will have on “Release (Release Time).” With posi-
tive (+) values

 of “Intensity (AMS1 Intensity),” setting this 

parameter to + will allow AMS1 to lengthen the time, and 
setting it to – will allow AMS1 to shorten the time. With a 
setting of 0 there will be no effect.

These parameters specify how “AMS2 (Time Mod. AMS2)” 
will control the amp 1 EG Time parameters (

☞“AMS1 (Time 

Mod. AMS1)”–“Rl (AMS1 SW Release)”).

▼ 4–3: Page Menu Command

When you select the page menu command “Sync Both 
EGs

,” a check mark will appear at the left of “Sync Both 

EGs.” In this state, you can edit the amp 1 EG and amp 2 EG 
simultaneously. (Editing either EG will change the settings 
of both EGs.) (

☞3–4A)

These are the parameters for amp 2 (used for oscillator 2). 
(

☞“4–1: Amp1 Level/Pan”–“4–3: Amp 1 EG.”)

These will appear when “Oscillator Mode” (1–1a) is Dou-
ble

.

Amp 1 EG changes (Level) (AMS=Velocity, Intensity = a positive (+) value)

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Softly played note when “St”=0 
and “At” and “Br” are set to + 
(settings of 4–3a: Amp 1 EG)

Strongly played note 
when “St”=0 and “At” and 
“Br” are set to +

Strongly played note 
when “St”=0 and “At” and 
“Br” are set to –

Amp 1 EG changes (Time) (AMS=Velocity, Intensity= a positive (+) value)

Settings of 4–3a: Amp 1 EG

Amp 1 EG changes (Time)
(AMS=Amp KTrk +/+, Intensity = a positive (+) value)
(When Amp Keyboard Track (4–2a) Low Ramp= a positive (+) value, and 
High Ramp = a positive (+) value)

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Low-pitched note played with 
“At,” “Dc,” “Sl,” and “Rl” at +

Softly played note with “At,” 
“Dc,” “Sl” and “Rl” at +
(settings of 4–3a: Amp 1 EG)

High-pitched note played with 
“At,” “Dc,” “Sl,” and “Rl” at –

Strongly played note with “At,” 
“Dc,” “Sl” and “Rl” at +

Strongly played note with 
“At,” “Dc,” “Sl” and “Rl” at –

0–1A

1–1A

1–1B

4–3A