Korg Electric Keyboard ユーザーズマニュアル

This sets the contrast of the LCD screen.
Higher values will increase the contrast.

If because of the temperature or other reasons, the LCD 
screen is unreadable when the power is turned on, use 
the following procedure to adjust the contrast.

1

Press the [EXIT] key three times, and then press the 
[GLOBAL] key.

2

Hold down the [EXIT] key, and press the [REC/WRITE] 
key.

3

Use the [VALUE] dial to adjust the setting.

This setting also applies to Load Preload/Demo Data 
(1.1–1d). Loading will not be possible if protect is speci-
fied for even one of the types of data selected for load-
ing in “Kind” (☞p.123).

This setting protects the internal program memory.

 Internal program memory will be protected, 

and the following write operations cannot be performed.

• Writing a program

• Receiving program data via MIDI data dump

• Loading program data from SmartMedia

 Data can be written to internal program 

memory.

This setting protects the internal combination memory.

 Internal combination memory will be pro-

tected, and the following write operations cannot be per-
formed.

• Writing a combination

• Receiving combination data via MIDI data dump

• Loading combination data from SmartMedia

 Data can be written to internal combina-

tion memory.

This setting protects the internal song memory.
However, when the power is turned off, the song data in 
song memory will be lost regardless of this setting.

 Internal song memory will be protected, and 

the following write operations cannot be performed.

• Recording to the sequencer

• Receiving song data via MIDI data dump

• Loading song data from SmartMedia

• Saving template songs in Sequencer mode

 Data can be written to internal song mem-

ory.

This setting protects the internal drum kit memory.

 Internal drum kit memory will be protected, 

and the following write operations cannot be performed.

• Writing a drum kit

• Receiving drum kit data via MIDI data dump

• Loading drum kit data from SmartMedia

 Data can be written to internal drum kit 

memory.

This setting protects the internal user arpeggio pattern 
memory.

 Internal user arpeggio pattern memory will 

be protected, and the following write operations cannot be 
performed.

• Writing an user arpeggio pattern

• Receiving user arpeggio pattern data via MIDI data 

dump

• Loading user arpeggio pattern data from SmartMedia

 Data can be written to internal user arpeg-

gio pattern memory.

■

☞ “Write Global Setting,” “Load Preload/Demo data,” 

“Change all bank references,” “Half Damper Calibration,” 
“After Touch Calibration” (1.1–1d)

Specify the polarity and function of a switch or pedal con-
nected to the rear panel.

Select the function that will be controlled by a pedal switch 
(PS-1 option [sold separately]) connected to the rear panel 
ASSIGNABLE SWITCH jack (☞p.222 “Foot Switch Assign 
List”).

Indicates the function that will be controlled by a foot vol-
ume pedal (XVP-10 or EXP-2 option [sold separately]) con-
nected to the rear panel ASSIGNABLE PEDAL jack (☞p.223 
“Foot Pedal Assign List”).

1.1–3a

1.1–3b