Korg Electric Keyboard ユーザーズマニュアル

This command renames the selected drum kit. You can input 
a name of up to sixteen characters. (☞BG p.43)

This command copies the settings of another drum kit to the 
currently-edited drum kit. Drum kits 24 (GM)–32 (GM) can-
not be edited, but you may copy them to another drum kit 
and then edit them.

1

Select “Copy Drum Kit” to access the dialog box.

2

Select the copy source drum kit (“From”).

3

To execute the Copy Drum Kit command press the [F8] 
(“OK”) key. To cancel without executing press the [F7] 
(“Cancel”) key.

This command copies the settings of an individual key to 
another key. You can also copy settings from two or more 
contiguous keys at once.

1

Select “Copy Key Setup” to access the dialog box.

2

Specify the beginning of the range of keys to be copied 
(“From Key”).

3

Select the copy destination key (“To Key”).
If you selected multiple keys in “From Key,” they will be 
copied sequentially, starting at “To Key” and extending 
upward.

4

To execute the Copy Key Setup operation, press the [F8] 
(“OK”) key. To cancel without executing press the [F7] 
(“Cancel”) key.

If ROM is selected for “Bank,” you can select drumsamples 
by category.
All drumsamples are grouped into one of fifteen categories.
For the procedure, refer to “Select by Category” (☞p.2)

It is not possible to edit the name of a drumsample cate-
gory or to change the assigned category of a drumsam-
ple.

Specifies the bank of the Low drumsample (☞“Drumsample 
Bank” 5.1–1b).

Selects the Low drumsample. This will be sounded by veloc-
ities lower than the value set for “Vel. SW L

→

H” (5.1–1a). 

(☞For details on each drumsample, refer to VNL.)
The drumsample can be selected using the utility menu 
command “Select by Category” (☞5.1–1d).

☞ “High Drumsample”(5.1–1b)

■ 

☞ “Write Drum Kits,” “Rename Drum Kit,” “Copy Drum 

Kit,” “Copy Key Setup,” “Select by Category” (5.1–1d)

For each key of a drum kit, you can set voice assign, pan, 
and effect routing etc.

 Even when the same key (note) is played 

repeatedly, the previous note will be halted before the new 
note is begun, so that the notes will not overlap. Normally 
you will leave this unchecked.

 This allows you to group keys to which a drum-

sample is assigned. Keys to which the same group number 
is assigned will be treated as a single group, and will be 
played monophonically with last-note priority. For example 
you might assign closed and open hi-hat sounds to the same 
group so that two or more hi-hat sounds can not sound 
simultaneously.
Off:

 Keys will not be grouped. Normally you will set this 

.

 Note-on messages will be received. Normally 

you will check this, but you can uncheck it if you do not 
want specific notes to sound.

5.1–2a

5.1–2b

5.1–3a

5.1–3b