Korg Electric Keyboard ユーザーズマニュアル

■

This command writes user arpeggio patterns U000 (INT)–
U215 (User).

1

Select “Write Arpeggio Patterns” to access the dialog box.

2

To execute the Write command press the [F8] (“OK”) key. 
To cancel without executing press the [F7] (“Cancel”) 
key.
You can also write the same data as “Write Arpeggio Pat-
terns” by pressing the [REC/WRITE] key.
Press the [REC/WRITE] key to access the “Update 
Arpeggio Patterns” dialog box, and press the [F8] to 
write the data.

“Pat,”“ 

  (Tempo),” “Oct,” “Reso,” “Sort,” “Latch,” 

“K.Sync,” and “Kbd” are parameters that are set in Pro-
gram, Combination, and Sequencer modes. The Write 
operation executed here does not save these parame-
ters.
If you move here from Program or Combination mode 
and set these parameters, you must return to the origi-
nal mode and write them.

This command renames the selected user arpeggio pattern. 
Up to sixteen characters can be input. Preset patterns P000–
P004 cannot be selected (☞BG p.43).

This command copies the settings of another user arpeggio 
pattern to the currently selected arpeggio pattern. It is not 
possible to copy from a preset arpeggio pattern P000–P004 .

1

Select “Copy Arpeggio Pattern” to access the dialog box.

2

Select the copy source arpeggio pattern “From.”

3

To execute the Copy Arpeggio Pattern command press 
the [F8] (“OK”) key. To cancel without executing press 
the [F7] (“Cancel”) key.

Here you can input Tones 0–11 for each step 01 to 48. “Step” 
can be a maximum of 48 steps, and Tone corresponds to up 
to twelve notes for the (up to) twelve keys pressed simulta-
neously. If “Sort” (6.1–1b) is checked, the notes that were 
pressed will correspond in ascending order of pitch to Tones 
0

, 1, etc. If “Sort” (6.1–1b) is unchecked, the notes that were 

pressed will correspond to Tones 0, 1, etc. in the order in 
which they were pressed.

These parameters are not valid for preset patterns 
P000–P004 .

Select the step that you wish to edit, and set/reset each 
Tone

.

When the “Step” is selected, use the numeric keys to input 
the Tones. Numeric keys [0]–[9] correspond to Tones 0–9, [–
] corresponds to Tone 10, and [./HOLD] to Tone 11. Each 
time you press a key, the Tone will be set or reset.
If “Fix Note” (6.1–1d) is checked, this will be displayed as 
“●.” If unchecked, this will be displayed as “❍.”
To delete all Tones of a step, use the Utility “Delete Step.” To 
insert a blank step, use the Utility “Insert Step.”

For each step, the pitch corresponding to the Tone can be 
raised or lowered in semitone steps. This lets you make set-
tings for the same tone in each step to create a melody, or to 
make settings for two or more tones in each step to play par-
allel chords.

 That step will not sound even if Tones have been speci-

fied.
LGT:

 Notes will continue sounding until the same Tone is 

sounded next, or until the pattern returns to the beginning. 
At this time, the display will change to “■” or “ .”
This setting is valid when the Program, Combination, or 
Song parameter “Gate” (PROG 6.1–1a, COMBI 6.1–2(3)a, 
SEQ 6.1–3(4)a) is set to Step. When making this setting, 
make sure that “Gate” is set to Step in the mode from which 
you arrived here.

The Tone of the step will sound with the velocity at 

which the key was played.
001–127:

 The specified velocity value will always be used.

This setting is valid when the Program, Combination, or 
Song parameter “Velocity” (PROG 6.1–1a, COMBI 6.1–2(3)a, 
SEQ 6.1–3(4)a) is set to Step.
When making this setting, make sure that “Velocity” is set to 
Step

 in the mode from which you arrived here.

6.1–2a

6.1–2b