Korg Electric Keyboard ユーザーズマニュアル

You can use the Dynamic Modulation (Dmod) function to 
control all Master Effects parameters in real-time from this 
instrument’s controllers or from an external MIDI sequencer.

In Program mode, the parameters are controlled on global 
MIDI channel “MIDI Channel” (GLOBAL 2.1–1a).
In Combination mode, and Sequencer mode, you can set 
the control channels for MFX1 and MFX2 using the Setup 
page “Control Channel” parameters of the “MFX1–2” tabs. 
Select the desired option from Ch01–16, and Gch.

Select this option if you wish to control the param-

eters for each Master Effect on different channels.
Gch:

 Select this option if you wish to control the parameters 

on global MIDI channel “MIDI Channel” (GLOBAL 2.1–1a). 
This is the normal setting.

The Master EQ (stereo, three-band EQ) is located right 
before AUDIO OUTPUT (MAIN) L/MONO, R. Low and 
High EQs are of the shelving type, and Mid EQ is a peaking 
type equalizer. You can control the Low Gain and High Gain 
parameters using the Dynamic Modulation function.
The Master EQ (stereo, three-band EQ) is applied to the sig- 
nal input from the L/R bus. For more information on the 
parameters, p.209.

The TRITON Le is equipped with two individual AUDIO 
OUTPUTs (INDIVIDUALs). You can route the oscillator 
(Program), timbre (Combination), and track (Sequencer) 
output or the post-IFX signals to these two individual out-
puts.
Use “BUS Select” (7.1–1a) in Program, Combination, or 
Sequencer mode to route the oscillators (Program), timbres 
(Combination), or tracks (Sequencer) to AUDIO OUTPUTs 
(INDIVIDUAL).
If you are using the Insert Effects, use “BUS Select” of the 
7.1: Ed–InsertFX (or Insert FX), and Setup page to route the 
post-IFX signals.

 

Monaural signals are routed to AUDIO OUTPUTs 

(INDIVIDUAL).

 

Stereo signals are routed to AUDIO OUTPUTs (INDI-

VIDUAL).

*1: Sold separately EXB-SMPL option is installed