Korg Electric Keyboard ユーザーズマニュアル

ページ / 269
186
39: PitchShft Mod 
(Pitch Shift Modulation)
This effect modulates the detuned pitch shift amount using an 
LFO, adding a clear spread and width to the sound by pan-
ning the effect sound and dry sound to the left and right. This 
is especially effective when the effect sound and dry sound 
output from stereo speakers are mixed.
a: Pitch Shift [cent], e: Depth
These parameters set the amount of pitch shift and amount of 
modulation by means of the LFO.
f: Pan, g: W/D
The Pan parameter pans the effect sound and dry sound to the left 
and right. With L, the effect sound is panned left, and the dry 
sound is panned right. With a W/D = Wet setting, the effect and 
dry sound will be output in a proportion of 1:1.
40: Rotary SP
(Rotary Speaker)
This effect simulates a rotary speaker, and obtains a more real-
istic sound by simulating the rotor in the low range and the 
horn in the high range separately. The effect also simulates the 
stereo microphone settings.
a: (Sw)
This parameter sets how the modulation source switches between 
rotation and stop.
When “Sw” = Tggl (Toggle), the speaker rotates or stops alter-
nately each time you press the pedal or operate the joystick.
Each time the value for the modulation source exceeds 64, 
the speaker rotates or stops alternately.
a
Pitch Shift
Sets the pitch difference from the input signal
–100...+100cent
b
LFO Wave (LFO Waveform)
Selects LFO Waveform
Triangle, Square
c
Freq (LFO Frequency)
0.02...20.00Hz
Sets the LFO speed
 Fx:09, 
(Source)
Selects the modulation source of LFO speed
Off...Tempo
(Amount)
–20.00...+20.00Hz
Sets the modulation amount of LFO speed
d
BPM/MIDI Sync
Off, On
Switches between using the frequency of the LFO speed and using 
the tempo and notes
 Fx:09, 
BPM
Selects MIDI Clock and assigns tempo
MIDI, 40...240
 Fx:09
Base (Base Note)
             
Selects the type of notes that specify the LFO speed
 Fx:09
Times
1...16
Sets the number of notes that specify the LFO speed
 Fx:09
e
Depth
–100...+100
Sets the LFO modulation depth for pitch shift amount
,
 
(Source)
Off...Tempo
Selects the modulation source of the depth of modulation
(Amount)
–100...+100
Sets the modulation amount of the depth of modulation
f
Pan
L, 1:99...99:1, R
Sets the  panning effect sound and dry sound separately
g
W/D (Wet/Dly)
Dry, 1:99...99:1, Wet
,
 
(Source)
Off...Tempo
–100...+100
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out  /  Dry: Stereo In - Stereo Out
LFO: Tri / Sqr
Pitch Shifter
Pan
+
Pitch
Higher
Pitch Shift Mod - Pitch Shift / Depth
Lower
Original Pitch
Pitch Shift (+ value)
LFO Waveform=Triangle
Depth (+value)
LFO Waveform=Square
Depth (–value)
a
Mode (Mode Switch)
Switches between speaker rotation and stop
Rotate, Stop
(Source)
Off...Tempo
Selects the modulation source that toggles between rotation and 
stop
(Sw)
Tggl, Mmnt
Selects switching mode of the modulation source that toggles 
between rotation and stop
b
Speed (Speed Switch)
Slow, Fast
Switches the speaker rotation speed between slow and fast
(Source)
Off...Tempo
Selects the modulation source that toggles between slow and fast
(Sw)
Tggl, Mmnt
Selects switching mode of the modulation source that toggles 
between slow and fast
c
H/R.Bal (Horn/Rotor Balance)
Rot, 1...99, Hrn
Sets the level balance between the high-range horn and low-range 
rotor
ManuSp (Manual Speed Control)
Off...Tempo
Selects the modulation source in case the rotation speed is changed 
directly  
,
d
Horn Accel (Horn Acceleration)
0...100
How quickly the horn rotation speed in the high range is switched
Ratio (Horn Ratio)
Stop, 0.50...2.00
Adjusts the (high-range side) horn rotation speed. Standard value is 
1.00. Selecting “Stop” will stop the rotation
e
Rotor Accel (Rotor Acceleration)
0...100
Determines how quickly the rotor rotation speed in the low range is 
switched
Ratio (Rotor Ratio)
Stop, 0.50...2.00
Adjusts the (low-range side) rotor rotation speed. Standard value is 
1.00. Selecting “Stop” will stop the rotation
f
MicDistance
0...100
Sets the distance between the microphone and rotary speaker
Spread (Mic Spread)
Sets the angle of left and right microphones
0...100
g
W/D (Wet/Dly)
Dry, 1:99...99:1, Wet
(Source)
Off...Tempo
–100...+100
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out  /  Dry: Stereo In - Stereo Out 
D
-mod
D
-mod
D
-mod
Mode Switch: Rotate/Stop
Speed Switch: Slow/Fast
Manual Speed Control
Speaker Simulation
Mic Distance
Mic Spread
Horn/Rotor
Balance
Horn
Rotary Speaker
Rotor
+