Korg Electric Keyboard ユーザーズマニュアル

BPM/MIDI SYNC can be used for most effects that have an 
LFO, such as 09:St. Wah/Auto Wah, and for some delay-
type effects such as 49:L/C/R BPM Delay. You can apply 
modulation that is synchronized to the tempo, or specify the 
delay time in terms of a note value so that the effect will syn-
chronize to the tempo of the arpeggiator or sequencer dur-
ing a live performance even if you change the tempo.
Parameters that allow BPM/MIDI SYNC to be used are 
marked by a 

 symbol at their right in the list of param-

eters for each effect.

“BPM/MIDI Sync” On
“Base (Base Note)“ 

“Times” 1
In this case, each cycle of the LFO will be as long as one 
quarter note.

If “BPM” is set to MIDI, the effect will synchronize to the 
tempo of the arpeggiator or sequencer (or to an external 
MIDI clock). If “BPM” is in the range of 40–240, the specified 
value will be used.

“L Bs (Base Note)” 

“Times” 1
“R Bs (Base Note)” 

“Times” 3
In this case, the delay time of the left channel will be the 
duration of an eighth note, and the delay time of the right 
channel will be the duration of a sixteenth note triplet.

When “BPM” is set to MIDI, the effect will synchronize to 
the tempo of the arpeggiator or sequencer (or to an external 
MIDI clock). If “BPM” is in the range of 40–240, the specified 
value will be used.
If the tempo, “Bs (Base Note),” and “Times” settings in con-
junction would cause the maximum delay time to be 
exceeded, the warning “TimeOver? >OVER!” will appear in 
the display. Please modify your settings so that this setting 
does not appear. (The maximum delay time will depend on 
the effect type.)