Korg Electric Keyboard ユーザーズマニュアル
224
The following table shows the relation between the MIDI
messages that are transmitted when the TRITON Le’s con-
trollers are operated, and the AMS (alternate modulation
source) or DMS (dynamic modulation source) that corre-
spond to each MIDI message. # indicates a fixed function,
and * indicates an assignable function.
When one of the TRITON Le’s controllers is operated, the
corresponding or the assigned control change will be trans-
mitted. Pitch Bend messages will be transmitted only when
the joystick is moved in the X (horizontal) direction. The
operation in each mode is described below. (Explanations
are given only for control changes, but the same applies to
pitch bend as well.)
messages that are transmitted when the TRITON Le’s con-
trollers are operated, and the AMS (alternate modulation
source) or DMS (dynamic modulation source) that corre-
spond to each MIDI message. # indicates a fixed function,
and * indicates an assignable function.
When one of the TRITON Le’s controllers is operated, the
corresponding or the assigned control change will be trans-
mitted. Pitch Bend messages will be transmitted only when
the joystick is moved in the X (horizontal) direction. The
operation in each mode is described below. (Explanations
are given only for control changes, but the same applies to
pitch bend as well.)
Program mode
When one of the TRITON Le’s controllers is operated, a con-
trol change message will be transmitted on the global MIDI
channel.
When one of the TRITON Le’s controllers is operated, a con-
trol change message will be transmitted on the global MIDI
channel.
If a REALTIME CONTROLS B-mode knob [1]–[4] is set
to Master Volume, the universal exclusive message
Master Volume will be transmitted.
to Master Volume, the universal exclusive message
Master Volume will be transmitted.
Combination mode
When one of the TRITON Le’s controllers is operated, a con-
trol change message will be transmitted on the global MIDI
channel.
Simultaneously, the message will also be transmitted on the
MIDI channel (“MIDI Channel” COMBI 3.1–1a) of any tim-
bre whose “Status”(COMBI 3.1–1a) is EXT or EX2.
When one of the TRITON Le’s controllers is operated, its
effect will apply to any timbre whose “Status” is INT and
whose “MIDI Channel” setting is either Gch or the same as
the global MIDI channel.
When one of the TRITON Le’s controllers is operated, a con-
trol change message will be transmitted on the global MIDI
channel.
Simultaneously, the message will also be transmitted on the
MIDI channel (“MIDI Channel” COMBI 3.1–1a) of any tim-
bre whose “Status”(COMBI 3.1–1a) is EXT or EX2.
When one of the TRITON Le’s controllers is operated, its
effect will apply to any timbre whose “Status” is INT and
whose “MIDI Channel” setting is either Gch or the same as
the global MIDI channel.
In the case of Master Volume, the universal exclusive
message Master Volume will be transmitted only on the
global MIDI channel.
message Master Volume will be transmitted only on the
global MIDI channel.
You can make settings for MIDI Filter (COMBI 4.1–4.4)
to enable or disable control changes and controllers for
each timbre. When checked, the above operations will
be enabled.
to enable or disable control changes and controllers for
each timbre. When checked, the above operations will
be enabled.
Effect dynamic modulation can be controlled when the
“Control Ch (Control Channel)” (COMBI 7.1–1b, 7.2–1a, 7.2–
1c) setting for IFX, MFX1, 2, or MEQ is either set to Gch or to
the same channel as the global MIDI channel. (In the case of
All Rt.
“Control Ch (Control Channel)” (COMBI 7.1–1b, 7.2–1a, 7.2–
1c) setting for IFX, MFX1, 2, or MEQ is either set to Gch or to
the same channel as the global MIDI channel. (In the case of
All Rt.
, control is possible on the MIDI channel of any
routed timbre.)
MIDI transmission when
the TRITON Le‘s controllers are
operated