Korg Electric Keyboard ユーザーズマニュアル

After executing this command, you can press the [COM-
PARE] key to return to the state before execution.

This command creates a song from a specified portion of a 
song in a cue list. For example if you have an eight-measure 
song and want to repeat measures 5–8, you can use this 
command to create a four-measure song from that portion. 
Then you can assign the resulting song to a step in a cue list, 
and repeat it.

1

In “Step,” select the desired step.

2

Select “Copy Song” to access the dialog box.

3

In “From Measure,” specify the first measure in the copy 
source song. In “To End of Meas,” specify the last mea-
sure.

4

In “To,” specify the song into which the data will be con-
verted. If you select a new song, a dialog box will ask you 
for confirmation. Press the [F8] (“OK”) key to create a 
new song and copy the data to that song. If you select an 
existing song that already contains settings and/or musi-
cal data, executing this command will erase the data of 
that song and rewrite it with the data from the copy 
source. Before you execute, be sure that you will not be 
losing important data.

5

If you check “Replace to original Song in Cue” and exe-
cute this command, the “Step” song will be replaced by 
the newly created song. If you execute without checking 
this box, the newly created song can be selected later for 
the desired step of the cue list.

6

To execute the Copy Song operation, press the [F8] 
(“OK”) key. To cancel, press the [F7] (“Cancel”) key.

Here you can set the B-mode functions that the REALTIME 
CONTROL knobs [1]–[4] and the [SW1] key, [SW2] key, will 
have in Sequencer mode.

When these switches or knobs are operated during 
recording, the MIDI messages that you assign here will 
be recorded.

Here you can set the B-mode functions (mainly various con-
trol changes) that the front panel REALTIME CONTROL 
knobs [1]–[4] will have in Sequencer mode (☞p.221 “Real-
time Control Knobs B Assign List”). The functions you spec-
ify here will operate when you rotate the front panel 
REALTIME CONTROL knobs [1]–[4] in B-mode.
Since the functions assigned to these knobs by the program 
of each track will not be valid, you can make new assign-
ments here.

☞ “Knob B Assign” (PROG 2.2–1a).

Here you can assign functions to the front panel [SW1] and 
[SW2] keys (☞p.220 “SW1, SW2 Assign List”).
Since the functions assigned to these switches and knobs by 
the program of each track will not be valid, you can make 
new assignments here.

☞ “SW 1/2 Assign” (PROG 2.2–1b).

☞ “Memory Status,” “Solo Selected Track,” “Rename Song,” 

2.2–1a

2.2–1c

2.2–1b