Yamaha 01V ユーザーズマニュアル
![Yamaha](https://files.manualsbrain.com/attachments/884c61a284ec9743365c8176528d257dbb7df7e8/common/fit/150/50/873735ee4330929e1549bc72378da029dfa61bac72d66c1f7587e7b724ba/brand_logo.png)
116
Chapter 11—Omni Outs
01V—Owner’s Manual
About the Omni Outs
The 01V’s four omni outs can be used as aux send outputs, bus out outputs, additional
stereo outputs, or post-fader direct outputs for input channels 1 through 16. Each omni
out features a variable output delay of up to 300 milliseconds.
stereo outputs, or post-fader direct outputs for input channels 1 through 16. Each omni
out features a variable output delay of up to 300 milliseconds.
Omni Outs
Omni out signals are converted to analog
using 18-bit D/A converters, and then output
via balanced 1/4-inch phone jacks with a
+4 dB nominal output level.
using 18-bit D/A converters, and then output
via balanced 1/4-inch phone jacks with a
+4 dB nominal output level.
Assigning Omni Outs
Omni outs are initially assigned to aux sends 1 through 4. They can also be assigned to
the bus outs, the left and right channels of the stereo output, or post-fader direct out-
puts of input channels 1 through 16.
the bus outs, the left and right channels of the stereo output, or post-fader direct out-
puts of input channels 1 through 16.
1. Use the [PAN/ROUTING] button to locate PAN/ROUT page 4, a shown
below.
2. Use the cursor buttons to select the OMNI OUT parameter boxes, and
the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to select
sources for the omni outs.
sources for the omni outs.
3. Press the [ENTER] button to confirm your selection.
OMNI OUT
+4dB (BAL)
3
4
2
1