Meridian America Meridian 518 ユーザーズマニュアル

In Resolution Enhancement mode, 518 maintains a continuous memory of
the DSP, Dither, Gain, In and Out settings for each source.

So, if you had determined that, e.g. CD should always use Gain 0dB but
that Radio could always use Emphasis and +2dB, then 518 will remember
these and automatically reconfigure itself for each source.

In addition to the DSP modes offered in Control Unit (see page 15),
Resolution Enhancement adds Bypass.

Bypass transmits all 24 bits on the input to the output without any
processing.

Note When Bypass is chosen, all the other front panel keys are disabled.

Selects Source or input

Cycle the display through:

Processing option with gain in dB

Dither option with gain in dB

Input/output choices with gain in dB

Sampling frequency and gain in dB

Blank

Select main processing method: Bypass,
Gain, Emphasis, De-emphasis.

Select dither or noise shaper to be used

Set number of input bits

Set number of output bits and consumer or
professional use of channel status

s

s

Decrease volume/gain

n

n

Increase volume/gain

Selects input depending on
customisation.

Puts the 518 into the Standby
state.

Autoconfigure (in Standby)

w  e

w  e

Access the Menus

 n  s

 n  s

Change the Menus

Change 518 Display

n

n

s

s

Change the primary volume.

Mutes output.