American Dj Fire Bowl ユーザーズマニュアル

Fire Bowl™

Set-Up/Operation Cont.

Repositioning The Flame (Silk Drape):

You may wish to reposition the flame drape to customize the effect.

1. Move the flame drape along the flame attachment rail by sliding

the magnetic ends along the rail.

2. For best results, do not stretch out the ends of the silk drape as

tight as it can get along the bottom. For a more realistic effect

allow some play between the two ends of the silk drape, move the

magnets slightly away from the side of the casing to achieve a

more realistic flame effect.

3. For best results; experiment with the flame position. Slight changes

in the position of the silk drape can drastically change the effect.

American DJ Supply

- www.americandj.com - Fire Bowl™ Instruction Manual Page 6

American DJ Supply

- www.americandj.com - Fire Bowl™ Instruction Manual Page 5

Fire Bowl™

Silk Drape

If the silk drape becomes creased, you may iron the flame using a non-

drip iron on a low setting. Do not steam iron.
If the silk drape becomes frayed, you may use a sharp pair of scissors

to carefully cut the loose silk strands. The silk drapes may become

frayed after a period of four weeks.

Fire Bowl™

Warranty Registration

The Fire Bowl™ carries a 90 day limited warranty. Please fill out the

enclosed warranty card to validate your purchase. All returned service

items whether under warranty or not, must be freight pre-paid and

accompany a return authorization (R.A.) number. If the unit is under

warranty you must provide a copy of your proof of purchase invoice.

Please contact American DJ

customer support for a R.A. number.

Fire Bowl™

Cleaning

Fixture Cleaning:

Due to fog residue, smoke, and dust cleaning should be carried out

periodically to optimize light output. Cleaning frequency depends on

the environment in which the fixture operates (I.e. smoke, fog residue,

dust, dew). In heavy club use we recommend cleaning on a monthly

basis. Periodic cleaning will ensure longevity, and crisp output. Always

be sure the unit is turned off and unplugged before performing any

cleaning procedures.
1. Use normal glass cleaner and a soft cloth to wipe down the outside

casing.

2. Use a brush to wipe down the fan grill.

3. Whip down the colored bulb covers with a damp cloth to remove

residue.

4. Always be sure to dry all parts completely before plugging the unit

back in.

Fire Bowl™

Lamp & Fuse Replacement

Caution:

Always replace with the exact same type lamp and fuse,

unless otherwise specified by an authorized American DJ

technician.

Replace with anything other than the specified part can damage your

unit and will void your manufactures warranty.

Warning:

If after you have replaced the lamp or fuse and you

continue to blow either one, STOP using the unit. Contact customer

support for further instructions, you may have to return the unit for

servicing. Continuing to use the unit may cause serious damage.

Fuse Replacement:

Disconnect the unit’s main power supply. Insert

a standard flat head screw driver in to the fuse holder housing located

on inner plate of the unit. Turn the screwdriver in counter-clockwise

direction to unlock the fuse holder. Remove the fuse holder to expose

the fuse. Remove the old fuse and discard it. Replace the fuse with

the same type. Insert the fuse holder back into it’s housing and turn it

in clockwise direction to lock the holder back in to place.

Lamp Replacement:

Caution! Never attempt to change the lamps

while the fixture is plugged in. Always disconnect the main power

and allow the unit ample time to cool before attempting to replace

the lamp.

1. Be sure to follow the proper procedures when handling halogen

lamps. Never touch the new lamp with your bare fingers.

2. Carefully pull the lamp out of the socket and discard it.

3. Replace the lamp with an exact match.

4. If necessary adjust the position of the lamps.