Avaya S8300 ユーザーズマニュアル
2
Installing Hardware for the G700 Media Gateway and S8300 Media Server
Installation and Cabling
Installation and Upgrades for G700 and S8300
91
December 2003
Link Elements in Multiple Racks
1
Use the long (6ft, 2 m) Avaya X330LC cable to connect elements in two racks.
2
Connect the Avaya X330LC cable (dark grey connector) to the port on first unit of the stack
marked “to the lower unit.”
marked “to the lower unit.”
3
Connect the Avaya X330LC cable (light grey connector) to the port on the last unit in the stack
marked “to the upper unit.”
marked “to the upper unit.”
To implement stack redundancy:
4
Connect the dark grey connector of the black Redundant Cable to the port marked “to lower unit”
on the bottom unit of the stack.
on the bottom unit of the stack.
5
Connect the light grey connector of the black Redundancy Cable to the port marked “to upper
unit” on top unit of the stack.
unit” on top unit of the stack.
CAUTION:
Do not cross-connect two stack elements with two Octaplane (light-colored) cables. If you
wish to cross-connect for redundancy, use a black redundancy cable.
wish to cross-connect for redundancy, use a black redundancy cable.
Figure 14: Linking Units in Multiple Racks
You have now mounted the fully equipped Avaya G700 Media Gateway in the rack, and cabled units
together as described in the planning documents. When all the units are mounted, and cabled, you are
ready to connect to electrical ground conductors.
together as described in the planning documents. When all the units are mounted, and cabled, you are
ready to connect to electrical ground conductors.
cadc2stk LAO 030203
X330LC or X330L-LC Cable