Optimus MD-1200 ユーザーズマニュアル

34

Note: Press 

 after you select Track 1

in Step 3 to use the drum pads. That
way, you can also start recording by
playing a drum pad.

This data is stored on Track 1 along with
the the notes you played:

• tone number

• rhythm number

• rhythm controller (

,

, etc.) operations

• pitch bender operations

• pedal operations

• drum pad operations

See “Recording Multiple Tracks” on
Page 37 to record on the other five
tracks.

• When you record on a track that

contains data, the new recording
replaces the previous recording.

• The touch response setting (on/off)

is not recorded. However, the
strength of the strike is recorded.

• Channel 1 mixer parameters are

automatically recorded to Track 1.

• The memory can store a total of

about 5,200 notes. If the remaining
memory is less than 100 notes, the
measure and beat numbers flash on
the display. When memory becomes
full, recording automatically stops
(and auto-accompaniment or rhythm
stops playing, if used).

• Memory contents are saved as long

as power is supplied to the key-
board. Unplugging the adapter with-
out batteries or with weak batteries
erases the memory. To prevent data
loss, connect an adapter before
replacing the batteries.

• Turning off the keyboard while

recording erases the contents of the
track you were recording.

• You can transfer memory contents

to another MIDI device. See “Dump-
ing/Importing Data” on Page 45.

1. Press 

 until 

appears. 

2. Within 5 seconds, use 

 or 

 (or 

 or

) to select a song number.

3. Within 5 seconds, press 

 to play back the song you

selected. You can use 

 to

adjust the playback tempo.

4. Press 

 again to stop

playback.

• You can use layer and/or split during

memory playback.

• You can change the rhythm during

playback.

• Pressing 

 during the

song restarts the song from the
beginning.

42-4041.fm  Page 34  Tuesday, August 3, 1999  6:56 AM