iOptron 8032 ユーザーズマニュアル

 
The assemble example shown here is for installing a MiniPier onto an iEQ45 tripod. For an 
iEQ30 mount, either an iEQ45 tripod or a MiniTower/MiniTower Pro tripod is needed. 

1.  Extend the tripod legs and adjust the height of the tripod. Secure the tripod. Remember that 

the MiniPier will add 8 inch in height. Remove the alignment peg from the iEQ45 tripod head. 

 
2.  Release three locking screws located at the bottom of the MiniPier body. Put the Base 

Flange onto the tripod head. Using two M8 hex head screws to secure the base flange on to 
the iEQ45 tripod. 

3.  Put the MiniPier body onto the Base Flange and secure it using three locking screws. 

4.  Final adjust the tripod height and level the tripod with MiniPier before mounting the iEQ45 

mount. 

M8 screw

Locking screw