iOptron 9200 プリント

ページ / 1
For more help visit www.iOptron.com (click under “support”) or email support@ioptron.com 
Also talk to other users on our Facebook pages. Search iOptron or LiveStar 
 
Quick Start Guide 
LiveStar™ Planetarium  
#9200  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Step 1. Align base due south. 
 
Align the compass (at the base of globe) to point south. That is, the “S” should 
be on the outer rim. 
 
Step 2. Set local latitude.
 
Set up the LiveStar™ Mini Planetarium to match your geographic latitude. If you 
do not know your latitude, you can visit www.iOptron.com/location to find your 
latitude. Next, loosen the two Polar Altitude hand wheels (on either side of the 
globe) and manually swing the U-Bar out until your latitude aligns with the inner 
mark. Then re-lock both hand wheels. 
                                         
 
Step 4. Plug in power cord. 
 
To power up the Mini Planetarium – plug the power cord into the bottom of the 
Mini Planetarium and then into a wall outlet. A red light will appear in the date 
wheel. 
 
Step 5. Using remote control.
 
Use the remote control to turn on the light. When you first hit the light button on the remote 
control, you will notice the light is dim. You can hit the light button again to make it even 
brighter. 
 
Press the speed button (bottom right button) and experience the change of the night sky 
as time goes by. There are two speeds. Press once for slow and twice for fast. By clicking 
a third time you can stop the globe from rotating. (Note: the motor has a safety feature 
which shuts off after 15 minutes of continuous rotation)
 
 
To change direction press the direction button (bottom left button). Press once to change 
direction. Press twice to resume the same direction. 
 
With the LiveStar™ Mini Planetarium from iOptron you and your family can 
experience the excitement of going to a planetarium right from inside your 
own home! The LiveStar™ Mini Planetarium projects the night sky right onto 
the ceiling and walls allowing you to explore the stars indoors. You’ll be able 
to see the stars and constellations – even see the Milky Way. Plus, the 
planetarium rotates to mimic the rotation of the night sky! Simple to set up 
and use – it provides a fun way to learn about astronomy. 
Fun for the home or classroom! 
 
Features 
• 
See the night sky in your own room! 
• 
Globe actually rotates to show movement of stars during the night. 
• 
Set latitude, date and time to see the night sky where you live. 
Contents 
• 
Planetarium globe & base 
• Remote 
control 
• AC 
power 
cord 
• Quick 
Start 
Guide 
 
Hand wheel 
mark 
Step 3a. Set day 
Manually move the month dial until 
the current month and day aligns with 
the zero on the top dial (see yellow 
arrow). Note: Each month consists of 
3 marks or 30 days (see area 
between the red lines). So each mark 
is 10 days. Shown here is March 15 – 
in the middle of March. 
Step 3b. Set hour 
Now, manually move both dials 
at the same time until the current 
hour is front center (see yellow 
dash). Shown here is 14:00 or 
2pm. So this example shows the 
sky at 2pm on March 15.