KYOCERA KD135SX-UPU ユーザーズマニュアル

1 

 

 

 

FOR THE 

 

OF 

SOLAR PHOTOVOLTAIC POWER MODULES 

Please read this manual carefully before installing the modules.

KYOCERA 

6C-209365

As the world leader in development and application of high technology 
ceramic/silica materials, Kyocera offers a wide range of highly efficient 
and reliable crystalline silicon solar photovoltaic (PV) power modules. 
Kyocera began to extensively research PV technology in 1975 and 
commenced manufacturing operations in 1978. Since then, Kyocera 
has supplied millions of cells and modules throughout the world. With 
years of experience and state-of-the-art technology, Kyocera provides 
the highest quality PV power modules in a range of sizes designed to 
meet the requirements of the most demanding energy and power users 
worldwide. 
 

Kyocera PV power modules consist of a series of electrically 
interconnected crystalline silicon solar cells

,

 which are permanently 

laminated within a pottant and encapsulated between a tempered glass 
cover plate and a back sheet

.

 The entire laminate is secured within an 

anodized aluminum frame for structural strength, ease of installation, 
and to protect the cells from the most severe environmental conditions. 
 

Kyocera PV modules are a reliable, virtually maintenance-free direct 
current (DC) power source, designed to operate at the highest level of 
efficiency. Kyocera PV modules are ideal to remote homes, 
recreational vehicles, water pumps, telecommunication systems and 
many other applications either with or without using

 

storage batteries. 

 

4. WARNINGS & SAFETY 

PV modules generate electricity when exposed to light. Arrays of many 
modules can cause lethal shock and burn hazards. Only authorized 
and trained personnel should have access to these modules. To 
reduce the risk of electrical shock or burns, PV modules may be 
covered with an opaque material during installation. Do not touch live 
terminals with bare hands. Use insulated tools for electrical 
connections.  Do not use these PV modules for solar concentration. 

“SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C 
AND D HAZARDOUS LOCATIONS, OR NONHAZARDOUS 
LOCATIONS ONLY.” 

 

“WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT 
EQUIPMENT WHILE THE CIRCUIT IS LIVE OR UNLESS THE AREA 
IS KNOWN TO BE FREE OF IGNITABLE CONCENTRATIONS.” 

“WARNING - EXPLOSION HAZARD - SUBSTITUTION OF ANY 
COMPONENT MAY IMPAIR SUITABILITY FOR CLASS I, DIVISION 
2.” 

・  Before installing your

 

PV

 

system, contact local authorities to 

determine the necessary permitting, installation and inspection 
requirements. 

・  Systems should be installed by qualified personnel only. The 

system involves electricity, and can be dangerous if the 
personnel are not familiar with the appropriate safety procedures. 

・  Do not step on a PV module. 
・  Although Kyocera PV modules are quite durable, the glass can 

be broken (and PV module will no longer work properly) if it is 
dropped or hit by tools or other objects. 

・  PV module frame is made of anodized aluminum, and therefore 

corrosion can occur if PV module is subject to a salt-water 
environment and is in contact with another type of metal 
(electrolytic corrosion), If required, PVC or stainless steel 
washers can be placed between  PV

 

module frame and support 

structure to prevent this type of corrosion. 

・  KD series module frames must be attached to a support structure 

by one of the methods described in Section 7, Installing KD series 
modules. 

・  Module support structures to be used to support PV modules 

should be wind rated and approved by the appropriate local and 
civil codes prior to installation. 

・  Do not expose the back of PV module to direct sunlight. 
・  In Canada installation shall be in accordance with CSA C22.1, 

Safety Standard for Electrical Installations, Canadian Electrical 
Code, Part 1. 
 

・In case of roof installation,  PV module assembly shall be mounted 

on a fire resistant roof covering rated for the application. KD series 
modules are comprised of a glass front surface, polyethylene 
terephthalate (PET) back sheet with a Class C fire rating. 

 

・ Refer to “Grounding” section. 

 

 

・ 

When PV modules are used to charge batteries, the battery must 
be installed in a manner which will ensure the performance of the 
system and the safety of its users

. 

manufacturer’s safety guidelines concerning installation, 
operation and maintenance recommendations. In general, 
the battery (or battery bank) should be kept away from people 
and animals. Select a battery site that is protected from sunlight, 
rain, snow, debris, and is well ventilated. Most batteries generate 
hydrogen gas when charging, which can be explosive. Do not 
light matches or create sparks near the battery bank. When a 
battery is installed outdoors, it should be placed in an insulated 
and ventilated battery case specifically designed for this purpose

. 

 

In most applications, Kyocera modules should be installed in a location 
where they will receive maximum sunlight throughout the year. In the 
Northern Hemisphere, the modules should typically face south, and in 
the Southern Hemisphere, the modules should typically face north. 
Modules facing 30 degrees away from true South (or North) will lose 
approximately 10 to 15 percent of their power output. If the module 
faces 60 degrees away from true South (or North), the power loss will 
be 20 to 30 percent. When choosing a site, avoid trees, buildings or 
obstructions which could cast shadows on PV modules especially 
during winter season when the arc of the sun is lowest over the horizon. 
 

Kyocera modules produce bigger

 

power when they are pointed directly 

at the sun. For stand alone installations PV modules should be tilted for 
optimum winter performance. As a general rule, if the system power 
production is adequate in the winter, it will be satisfactory during the 
rest of the year. 

 

PV module tilt angle is measured between PV 

modules and the ground. Refer to the recommended module tilt angle 
table for your site. 

TILT ANGLE

MODULE

SUNLIGHT

GROUND(HORIZONTAL)