Land Pride RTR1542 ユーザーズマニュアル
11
5/05/06
RTR10 & RTR15 Series Rotary Tillers 311-431M
Land Pride
Section 1: Assembly and Set-Up
Rear Deflector Assembly
Refer to Figure 1-3:
Attach Chain (#2) to rear deflector (#1) with wire
retaining pin (#3). Place 2nd chain loop on opposite end
of chain into slot “A”.
retaining pin (#3). Place 2nd chain loop on opposite end
of chain into slot “A”.
Rear Deflector
Figure 1-3
22250
Tractor Hook-Up
Refer to Figure 1-4:
1.
1.
Some tractors are equipped with multi-speed PTO
ranges. Be certain your tractor PTO is set for 540 rpm.
ranges. Be certain your tractor PTO is set for 540 rpm.
2.
Back tractor up to tiller until lower 3-Point links are
aligned with the hitch clevises on the tiller.
aligned with the hitch clevises on the tiller.
3.
Secure tractor’s 3-Point lower links to the lower hitch
clevises using 7/8" diameter hitch pins.
clevises using 7/8" diameter hitch pins.
4.
Secure the tractor’s top link to the tiller top hitch using
a 3/4" diameter hitch pin (supplied by customer).
Adjust tractor top link in order to level the tiller.
a 3/4" diameter hitch pin (supplied by customer).
Adjust tractor top link in order to level the tiller.
5.
Prevent damage to the driveline u-joints by adjusting
the tractor’s 3-Point lift height so that the tiller tines are
not lifted more than 14 inches off the ground.
the tractor’s 3-Point lift height so that the tiller tines are
not lifted more than 14 inches off the ground.
!
WARNING
Damaged drivelines could cause serious injury or death.
IMPORTANT: PTO operation and/or engagement
with unit higher than 14” will damage driveline
components. See Figure 1-4.
with unit higher than 14” will damage driveline
components. See Figure 1-4.
Tractor Hook-Up
Figure 1-4
22248