Acu-Rite 1036 ユーザーズマニュアル

Set to match 

display unit

4 AA Batteries

Remove and discard

Locate the A-B-C switch inside the 

battery compartment. Set the A-B-C 

switch to A, B or C. You must select 

the same letter choices for both the 

sensor and the display unit in order 

for the units to synchronize. 

Batteries MUST be installed for 

this product to operate. AcuRite 

recommends high quality alkaline 

or lithium batteries for the best 

product performance. Heavy duty 

or rechargeable batteries are not 

recommended.
The 5-in-1 sensor requires lithium 

batteries in low temperature 

conditions. Cold temperatures can 

cause alkaline batteries to function 

improperly. Use lithium batteries in 

the 5-in-1 sensor for temperatures 

below -4ºF / -20ºC.
1. Slide off the battery   

 

  compartment cover. 
2. Insert 4 x AA batteries into the 

  battery compartment, as  

  shown. Follow the polarity  

  (+/-) diagram in the battery  

 compartment.
3. Replace the battery cover.

Locate and remove the rain gauge 

stabilizer (plastic tab) taped into 

the bottom of the sensor. The rain 

gauge will not function until this is 

removed.