Oregon Scientific WMR100 ユーザーズマニュアル

10

EN

The base station provides 
wind speed and wind 
direction information.  
To read the wind direction 
fi nd the compass point the 

 is pointing to. 

 

The timestamp records the date and time when storing 
the wind speed readings.

To select the wind speed unit:
Press UNIT (at the bottom of the base station) to switch 
between:
•  Metres per second (m / s) 
•  Kilometers per hour (kph)
•  Miles per hour (mph) 
•  Knots (knots) 

 

  

N/A 

<2 mph (<4km/h)

N/A

N/A

  

Light 

2-8 mph (3~13 km/h)

  

Moderate 

9-25 mph (~14-41 km/h)

  

Strong 

26-54 mph (~42-87 km/h)

  

Storm 

>55 mph (>88 km/h)

To display the AVERAGE and GUST wind:
1. Press 

SELECT to navigate to the Wind Speed and  

 

Wind Direction Area. 

 will show next to the Area.

2. Press 

MODE to toggle between AVERAGE and  

 

GUST wind readings. 

To display the maximum speed and direction for 
gust wind:
In  the  Wind  Speed  and  Wind  Direction  Area,  press 
MEMORY /  

In  the  Wind  Speed  and  Wind  Direction  Area,  press 

 ON/OFF to toggle between wind speed 

/ MAX GUST wind readings. The timestamp is displayed 
accordingly in the Clock Area.

To clear the memories and timestamp for the wind 
readings: 
In the Wind Speed and Wind Direction Area, press and 
hold MEMORY /  

 ON/OFF to clear the readings.

To change the high gust wind speed alarm: 
1.  In the Wind Speed and Wind Direction Area, press  
 

and hold ALARM to enter the high gust wind alarm  

 setting.
2.  Rotate the dial left or right to set the desired values.
3. Press 

ALARM to confi rm the settings.

To activate / deactivate the high gust wind speed 
alarm:
1.  In the Wind Speed and Wind Direction Area, press  

ALARM repeatedly to select the desired alarm.

2. Press MEMORY /  

 ON/OFF to activate or  

  deactivate the alarm.

The  weather  station  works  with  one  UV  sensor  and 
one  rain  gauge.  The  station  is  capable  of  storing  and 
displaying  the  hourly  history  data  for  the  last  10  hours 
of  UV  index,  and  24  hours  of  rainfall  and  barometric 
pressure readings. 

The bar chart  display  shows  the  current  and  historical 
data for the UV index, barometric pressure and rainfall 
readings.

To view the UV / Barometer / Rainfall readings:
1. Press SELECT to navigate to the UV / Barometer /  
  Rainfall Area. 

 will show next to the Area.

2. Press MODE to toggle between UVI / Barometer  
  / Rainfall readings. The corresponding icon will  
 appear:

                UVI             BAROMETER       RAINFALL
     

 

3.  Rotate the dial left or right to view the historical data  
  for the selected area. The corresponding historical  
  readings are showing.

 NOTE  The number shown in the HR icon indicates how 
long  ago  each  measurement  was  taken  (e.g.  2  hours 
ago, 3 hours ago, etc.). 

To select the measurement unit for the barometer or 
rainfall readings:
In the UV / Barometer / Rainfall Area, press UNIT (at the 
bottom of the base station) to switch between:
•  For barometer: Millimeters of mercury (mmHg),  
  inches of mercury (inHg), millibars per hectopascal  

(mb / hpa).

•  For rainfall: Millimeters (mm), inches (in), inches per  
  hour (in / hr)

  hour

  hour

 or millimeters per hour (mm / hr). 

WMR100_EN_86L4515-017.indd   10

6/15/06   4:26:27 PM