Oregon Scientific BAR988HGA ユーザーズマニュアル
EN
20
The UV sensor must be activated before you
try and set the additional features. Please refer to the
UVR138A User Manual for more information.
UVR138A User Manual for more information.
TEMPERATURE AND HUMIDITY
The weather station can display the following information
from any of the 5 remote sensors:
from any of the 5 remote sensors:
•
Current, minimum, and maximum temperatures and
relative humidity percentages.
relative humidity percentages.
•
Comfort level indicator and trend line (rising, falling,
or steady).
or steady).
Data is collected and displayed approximately every
60 seconds.
60 seconds.
VIEW TEMPERATURE AND HUMIDITY AREA
Press SELECT to navigate to the Temperature and
Humidity Areas.
Humidity Areas.
Temperature data is given at the top; Humidity is below.
NOTE
SELECT MEASUREMENT UNIT
Slide the °C / °F switch (inside the clock battery
compartment), to the setting you want.
compartment), to the setting you want.
SELECT SENSOR CHANNEL
Press CHANNEL to switch between sensors 1-5.
The house icon shows the selected remote sensor.
•
To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will
be displayed for 3 seconds.
CHANNEL for 2 seconds. Each sensor's data will
be displayed for 3 seconds.
•
To end auto-scan, press CHANNEL or MEMORY
with the Temperature / Humidity Area selected.
with the Temperature / Humidity Area selected.
If you select a sensor that collects only
temperature data, the humidity will not be shown.
MINIMUM / MAXIMUM RECORDS
•
Press MEMORY repeatedly to view current,
maximum and minimum records for the selected
sensor.
maximum and minimum records for the selected
sensor.
•
To clear the records, press and hold MEMORY for
2 seconds. A beep will sound to confirm that the
memory has been cleared.
2 seconds. A beep will sound to confirm that the
memory has been cleared.
NOTE
BAR988HGA English R5
9/18/04, 3:00 AM
20