Oregon Scientific BAR386 ユーザーズマニュアル

EN

8

If the channel 1 sensor falls between 3°C to –2°C (37°F 
to 28°F), 

 flashes to warn you that the temperature is 

approaching freezing. 

NOTE  The  warning  will  automatically  stop  if  the 
temperature goes outside the ice-warning range.

The temperature and pressure trend icons are based on 
recent sensor readings. 

An alert can be set to sound if the sensor set to channel 1 
records above or below a temperature of your choice.  

•  When calendar is set press   or   to view the moon 

phase for the next/previous day.

•  Press and hold   or   to scan through the years 

(2001 to 2099).

To end auto-scan:
Press CHANNEL or MEM.

To toggle between current, minimum and maximum 
records for the selected sensor:
Press MEM repeatedly.

To clear the records:
Press and hold MEM for 2 seconds. 

To set alarm ON / OFF:
1.  Press and hold TEMP HI / LO   . 
2.  Use    and    to select high / low temperature alarm. 

Press TEMP HI / LO    to confirm.

3.  Press   /    to set alarm ON / OFF and press TEMP 

HI / LO    to confirm.

4.  If alarm has been activated, use   and    to select 

the temperature.

5.  Press TEMP HI / LO    to confirm.

To silence the hi / lo temperature alarm:
Press any key. The alarm resets automatically and will 
resound if the hi / lo temperature is exceeded again.

Waxing Crescent

New Moon

Waxing Gibbous

First Quarter

Full Moon

Last Quarter

Waning Gibbous

Waning Crescent

P/N: 300100700-00009-10 REV1
10/100