Oregon Scientific 086L004438-013 ユーザーズマニュアル

7

EN

This  product  forecasts  the  next  12  to  24  hours  of 
weather  within  a  30-50  km  (19-31  mile)  radius  based 
on barometric pressure trend readings.
            ICON 

  

                        

       

Clear

Cloudy

Rainy

Partially Cloudy

To set the alarm:
1.  Press and hold ALARM for 2 seconds.
2.  Press   /   to set hour / minute. 
3.  Press ALARM to confirm.   indicates alarm is ON.

To enable / disable the alarm:
1.  Press ALARM to display alarm time.
2.  Press ALARM again to turn alarm ON / OFF.

To silence the alarm:
•   Press SNOOZE to silence it for 8 minutes.

OR
•   Press any key except SNOOZE to turn the alarm off 

and activate it again after 24 hours. 

To ensure barometric readings are reliable set the altitude 
to reflect distance from sea level at your position.
1. Press and hold PRESSURE for 2 seconds.
2. Use    and    to  set  the  altitude  in  10  m  (33  ft) 

increments  from  -100  m  (-328  ft)  to  2500  m  (8202 
ft).

3. Press PRESSURE to confirm.

Barometer readings from the past 24 hours are stored by 
the main unit and used to provide weather forecast.

To select barometer measurement unit:
Press PRESSURE to toggle between mb and inHg.

To toggle temperature unit:
Press °C / °F.

To view outdoor sensors temperature readings:
Press CHANNEL. 

To auto-scan between sensors:
Press and hold CHANNEL for 2 seconds.
Each sensor’s data is displayed for 3 seconds.

NOTE The maximum operating altitude for the barometer 
and weather forecast is 2500m (8202 ft).