Ramsey Electronics rrw1b ユーザーズマニュアル
Ramsey Electronics Model No. RRW1B
Have you ever been frustrated with the range of your remote
controls? Tired of having to bounce your IR remote off of
ceilings and walls? Do you want to run your system from
another room or floor? Here is the answer to your prayers!
Extend the range of your remote controls through walls, around
corners, and even from outdoors!
controls? Tired of having to bounce your IR remote off of
ceilings and walls? Do you want to run your system from
another room or floor? Here is the answer to your prayers!
Extend the range of your remote controls through walls, around
corners, and even from outdoors!
•
The separate IR Receiver module (RRW1A) with sensitive element
can receive your remote control’s signal up to 36 feet away before
re-broadcasting it wirelessly!
can receive your remote control’s signal up to 36 feet away before
re-broadcasting it wirelessly!
•
The receiver (RRW1B) reconstitutes the radio signal using a PIC
micro-controller to restore noisy or weak signals and then re-
broadcasts the IR remote’s signal to your components via a wired
high-efficiency IR LED.
micro-controller to restore noisy or weak signals and then re-
broadcasts the IR remote’s signal to your components via a wired
high-efficiency IR LED.
•
Extend the range of your remote control to greater than 100 feet
wirelessly beyond the receive range of the IR sensor. Greater than
300 feet with a directional antenna pair (available separately).
wirelessly beyond the receive range of the IR sensor. Greater than
300 feet with a directional antenna pair (available separately).
•
Works with almost any remote control (38 kHz carrier), does not
need to be programmed.
need to be programmed.
•
Operate from 8V to 16V AC or DC. Use our AC125 wall adapters
for long operation.
for long operation.
•
LED indicator lets you know when you are receiving an IR signal
or not.
or not.