Patton electronic 1000CU8 ユーザーズマニュアル

Our miniature rack cards have a unique design: front func-
tion cards and rear interface cards that connect together on
a midplane power bus. This configuration allows interface
cables to remain connected while function cards are hot-
swapped (and vice versa). Each mini-rack and ClusterBox
has a power supply that services all cards in the chassis.
You can configure the mini-rack and ClusterBoxes with a

variety of function
cards (short-range
modems or 

SRMs,

fiber modems, convert-
ers, etc.) and you can mix-and-match function cards with
different interface cards.

16 ports fit a wide variety of Patton products—from
CSU/DSUs to short-range modems to converters.

Multiple datacom devices fit side-by-side in our mini-rack and ultra-compact ClusterBoxes!

F E A T U R E S & B E N E F I T S



Multi-function—Supports interface converters, CSUs,
fiber modems and virtually all Patton mini-modems.



Hot-swappable—Replace function cards 

without turning

off the power.



Reliable—Our distributed power system gives each rack
card its own power supply circuit



Flexible—Convenient rack mount and ClusterBox ver-
sions are available to meet your needs

Choose from a variety of rear interfaces:  DB-25, RJ-11, 
RJ-45, UD-26, etc.

Plug-in

Short-Range

Modems

(SRM)

Rack Card (RC) Description

(Configuration)

Page

Standalone

Model

Compatible

Rack Card

Rack Card (RC) Description

(Configuration)

Page

Standalone

Model

Compatible

Rack Card

Converters

& Modem

Eliminators

Fiber

Modems

Powered

Short-Range

Modems

(SRM)

Device

type

Device

type

S P E C I F I C AT I O N S

Environmental
Op. Temp.: 32–122°F (0–50°C)
Humidity: 5–90%, non-condensing

24 VDC Power
Input Voltage: 18–36 VDC
Input Current: 2A Max at 18 VDC
Surge Protection: Triggered at
39 VDC
Output Voltage: 12 VAC at 2A
Output Power: 24 W
LED indicators: Power, DC Input

48 VDC Power
Input Voltage: 40–60 VDC
Input Current: 1A Max at 40 VDC
Surge Protection: Triggered at
75 VDC
Output Voltage: 12 VAC at 2A
Output Power: 24 W

LED indicators: Power, DC Input

120 VAC Power
Input Voltage: 100–230 VAC
Input Current: 400 mA
Output Voltage: 10 VAC at 2.4 A
Output Power: 24 W
LED indicator: Power

220 VAC Power
Input Voltage: 200–240 VAC
Input Current: 200 mA
Output Voltage: 10 VAC at 2.4 A
Output Power: 24 W
LED indicator: Power

CATALOG

Network Access & Connectivity