Hitachi C 8FSHE ユーザーズマニュアル

-25-

(1) How to install packings (A) and (B)
      Remove the dust bag from the main body. Slide
      the head section toward the operator and insert
      packing (A) between the slide pipe, hinge and
      holder (A). Push the head back and secure the
      slide in position with packing (A) inserted by
      means of the slide securing knob.
      Turn the turn table to the right 57° and remove
      the side handle. Place packing (B) under the
      head and push the head down. Insert the locking
      pin while pressing packing (B) to secure the
      head section in position (Fig. 35).

(2) How to install packings (C) and (D)
      Put the main body mounted with packings (A)
      and (B) in the carton box aligning with the base
      packing and the inner frame (Fig. 36).
      Put packing (C) in the left side of the carton box
      on the top of holder (A).
      Put packing (D) in the right side of the carton box
      on the top of the switch handle.
      Place the accessories in the space at the rear
   of the base (Fig. 37).

(3) How to install top packing (E)
      Insert packing (E) in packings (C) and (D).
      Close the lids of the carton box and bind them
   together (Fig. 38).

Packing (A)

Packing (B)

Slide securing knob

Turn table

Fig. 35

Inner frame

Base packing

Fig. 36

Packing (C)

Packing (D)

Fig. 37

Lid

Packing (E)

Packing (C)

Packing (D)

Fig. 38