HP (Hewlett-Packard) EM886A8#ABA ユーザーズマニュアル

DDC/CI Support

Allows the computer to control some OSD menu
features such as brightness, contrast and color
temperature. Set to:

●

On

●

Off

The factory default is On.

 

Bezel Power LED

Turns off the power LED on the front panel of the
monitor. The factory default is On.

Sleep Timer

Provides the timer adjustment menu options:

●

Set Current Time—sets the current time in hours
and minutes

●

Set Sleep Time—sets the time you want to place
the monitor in sleep mode

●

Set on Time—sets the time you want the monitor
to wake up from sleep mode

●

Timer—sets the Sleep Timer feature On or Off.
The default setting is Off.

●

Sleep Now—immediately sets the monitor to
enter sleep mode

Language

Selects the language in which the OSD menu is
displayed. The factory default is English.

Information

Selects and displays important information about the
monitor.

Current Settings

Provides the current input video mode.

Recommended
Settings

Provides the recommended resolution mode and
refresh rate for the monitor.

Serial Number

Reports the serial number of the monitor. The serial
number is needed if contacting HP technical support.

FW Version

Reports the firmware version of the monitor.

Backlight Hours

Reports the total hours of backlight operation.

 

 

Service Support

Factory Reset

Returns all OSD menu settings and DDC/CI controls
to the factory default settings, except the Language.

Exit

Exits the OSD menu screen.

Two controls in the on-screen display can be adjusted to improve image performance: Clock and Clock
Phase.

18

Chapter 4   Operating the Monitor