Grizzly G4009 ユーザーズマニュアル
G4008/G4009 Drill Press
-9-
Figure 4.
Headstock/Column
1.
Place the Headstock assembly onto the top of
the column and lower it until it is seated on the
column as far as it will go.
the column and lower it until it is seated on the
column as far as it will go.
CAUTION:
The
head assembly is quite heavy; get assistance
when lifting.
when lifting.
2.
Rotate the headstock until it lines up with the
base.
base.
3.
Secure the headstock to the column by tight-
ening the setscrews located on the side.
ening the setscrews located on the side.
Figure 4.
4.
Screw the three handle bars into the tapped
holes in the handle body.
holes in the handle body.
Figure 9.
Figure 5.