Xantrex Technology 815-3524 ユーザーズマニュアル
975-0697-01-01
iii
Important Safety Instructions
IMPORTANT: R
EAD
AND
SAVE
THIS
I
NSTALLATION
G
UIDE
FOR
FUTURE
REFERENCE
.
This chapter contains important safety and installation instructions for the
Freedom SW 230V Inverter/Charger (Freedom SW 230V). Each time,
before using the Freedom SW 230V, READ ALL instructions and
cautionary markings on or provided with the inverter/charger, the batteries,
and all appropriate sections of this guide.
Freedom SW 230V Inverter/Charger (Freedom SW 230V). Each time,
before using the Freedom SW 230V, READ ALL instructions and
cautionary markings on or provided with the inverter/charger, the batteries,
and all appropriate sections of this guide.
NOTE: The Freedom SW 230V contains no user-serviceable parts.
ELECTRICAL SHOCK AND FIRE HAZARD
Installation must be done by qualified personnel to ensure compliance
with all applicable installation and electrical codes and regulations.
Instructions for installing the Freedom SW 230V Inverter/Charger are
provided here for use by qualified personnel only.
with all applicable installation and electrical codes and regulations.
Instructions for installing the Freedom SW 230V Inverter/Charger are
provided here for use by qualified personnel only.
Failure to follow these instructions will result in death or serious
injury.
injury.
ELECTRICAL SHOCK HAZARD
•
Do not expose the Freedom SW 230V to rain, snow, spray, or bilge
water. This inverter/charger is designed for marine applications only
when additional drip protection is installed in certain orientations.
See “Mounting Orientations” on page 21.
water. This inverter/charger is designed for marine applications only
when additional drip protection is installed in certain orientations.
See “Mounting Orientations” on page 21.
•
Do not operate the inverter/charger if it has received a sharp blow,
been dropped, has cracks or openings in the enclosure including if the
AC terminal cover has been lost, damaged, or will not close, or
otherwise damaged in any other way.
been dropped, has cracks or openings in the enclosure including if the
AC terminal cover has been lost, damaged, or will not close, or
otherwise damaged in any other way.
•
Do not disassemble the inverter/charger. Internal capacitors remain
charged after all power is disconnected.
charged after all power is disconnected.
•
Disconnect both AC and DC power from the inverter/charger before
attempting any maintenance or cleaning or working on any circuits
connected to the inverter/charger. The INVERTER ENABLE button
on the front panel does not function like a power switch that energizes
or de-energizes the unit. When AC and DC power sources are
connected and present, the unit is always energized.
attempting any maintenance or cleaning or working on any circuits
connected to the inverter/charger. The INVERTER ENABLE button
on the front panel does not function like a power switch that energizes
or de-energizes the unit. When AC and DC power sources are
connected and present, the unit is always energized.
•
Do not operate the inverter/charger with damaged or substandard
wiring. Make sure that all wiring is in good condition and is not
undersized.
wiring. Make sure that all wiring is in good condition and is not
undersized.
Failure to follow these instructions will result in death or serious
injury.
injury.
Freedom SW 3K2K 230V InvChg Install Guide.book Page iii Friday, June 20, 2014 9:11 AM