ZyXEL Communications vantage cnm ユーザーズマニュアル

Chapter 5 Device Network Settings

Vantage CNM User’s Guide

"

Be careful not to list your computer’s MAC address and set the Action field to 
Deny Association when managing the device via a wireless connection. This 
would lock you out.

Figure 49   Device Operation > Device Configuration > Network > Wireless Card > MAC Filter

The following table describes the fields in this screen.

Table 41   Device Operation > Device Configuration > Network > Wireless Card > MAC Filter

Activate 

MAC Filter

Select this to enable MAC address filtering. 

Filter Action  Define the filter action for the list of MAC addresses in the MAC Address table. 

Select Deny Association to block access to the router, MAC addresses not listed will 

be allowed to access the device. Select Allow Association to permit access to the 

router, MAC addresses not listed will be denied access to the device. 

Index

This is the index number of the MAC address.

User Name

Enter a descriptive name for the MAC address.

MAC 

Address 

Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal 

character pairs, for example, 12:34:56:78:9a:bc of the wireless stations that are 

allowed or denied access to the device in these address fields.

Apply

Click Apply to save your changes back to the device. 

Reset

Click Reset to begin configuring this screen afresh.