3M 747 ユーザーズマニュアル
8
2.0 Preparation Before Testing
2.1 Connecting the ESD Shoe Testing Plate
To reduce the risks associated with an explosion hazard, which, if not avoided, could result in death or
serious injury:
• Do not use in an explosive environment. 3M
serious injury:
• Do not use in an explosive environment. 3M
™
Shoes and Wrist Strap Tester 747 is not designed to be
intrinsically safe.
WARNING
To reduce the risks associated with hazardous voltage, which, if not avoided, may result in minor or
moderate injury and/or property damage:
• Do not use in an outdoor and/or wet environment.
moderate injury and/or property damage:
• Do not use in an outdoor and/or wet environment.
CAUTION
The supplied shoe testing plate and cable must be connected to test ESD
protective shoes. The cable for ESD shoe testing connects to the Shoes and Wrist
Strap Tester 747 and the shoe testing plate as follows:
1. Connect the BNC-plug end of the cable to the ESD shoes testing cable
protective shoes. The cable for ESD shoe testing connects to the Shoes and Wrist
Strap Tester 747 and the shoe testing plate as follows:
1. Connect the BNC-plug end of the cable to the ESD shoes testing cable
connector as shown below.
2. Connect the other end of the cable in the shoe testing plate using the supplied
M4 screw and washer.
Important Note:
ESD wrist straps can be tested while the ESD shoe testing plate and cable are connected.
ESD wrist straps can be tested while the ESD shoe testing plate and cable are connected.