Makita LS1216L ユーザーズマニュアル
3
Special Max. Cutting capacities
Crown molding 45
ﾟ type
(with Crown molding stopper used)
203 mm (8")
Base board (H)
(with Horizontal vise used)
165 mm (6-1/2")
No load speed (RPM)
3,200/min.
Laser Type (LS1216L only)
Wavelength 655 nm, Maximum output
1mW (Laser Class II)
Dimensions (L x W x H)
806 mm x 640 mm x 721 mm
Net weight
(31-3/4" x 25-1/4"x 28-3/8")
26.4 kg (58.2 lbs)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
USA007-2
For Your Own Safety Read
Instruction Manual
Instruction Manual
Before Operating Tool
Save it for future reference
GENERAL SAFETY
PRECAUTIONS
PRECAUTIONS
(For All Tools)
1.
KNOW YOUR POWER TOOL. Read the owner's
manual carefully. Learn the tool's applications
and limitations, as well as the specific
potential hazards peculiar to it.
manual carefully. Learn the tool's applications
and limitations, as well as the specific
potential hazards peculiar to it.
2.
KEEP GUARDS IN PLACE and in working
order.
order.
3. REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed from tool
before turning it on.
adjusting wrenches are removed from tool
before turning it on.
4.
KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents.
and benches invite accidents.
5.
DO NOT USE IN DANGEROUS ENVIRONMENT.
Do not use power tools in damp or wet
locations, or expose them to rain. Keep work
area well lighted. Do not use tool in presence
of flammable liquids or gases.
Do not use power tools in damp or wet
locations, or expose them to rain. Keep work
area well lighted. Do not use tool in presence
of flammable liquids or gases.
6.
KEEP CHILDREN AWAY. All visitors should be
kept safe distance from work area.
kept safe distance from work area.
7.
MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
master switches, or by removing starter keys.
8.
DO NOT FORCE TOOL. It will do the job better
and safer at the rate for which it was designed.
and safer at the rate for which it was designed.
9.
USE RIGHT TOOL. Do not force tool or
attachment to do a job for which it was not
designed.
attachment to do a job for which it was not
designed.
10. WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, rings, bracelets, or
other jewelry which may get caught in moving
parts. Nonslip footwear is recommended.
Wear protective hair covering to contain long
hair.
other jewelry which may get caught in moving
parts. Nonslip footwear is recommended.
Wear protective hair covering to contain long
hair.
11. ALWAYS USE SAFETY GLASSES. Also use
face or dust mask if cutting operation is dusty.
Everyday eyeglasses only have impact
resistant lenses, they are NOT safety glasses.
Everyday eyeglasses only have impact
resistant lenses, they are NOT safety glasses.
12. SECURE WORK. Use clamps or a vise to hold
work when practical. It's safer than using your
hand and it frees both hands to operate tool.
hand and it frees both hands to operate tool.
13. DO NOT OVERREACH. Keep proper footing
and balance at all times.
14. MAINTAIN TOOLS WITH CARE. Keep tools
sharp and clean for best and safest
performance. Follow instructions for
lubricating and changing accessories.
performance. Follow instructions for
lubricating and changing accessories.
15. DISCONNECT TOOLS before servicing; when
changing accessories such as blades, bits,
cutters, and the like.
cutters, and the like.
16. REDUCE THE RISK OF UNINTENTIONAL
STARTING. Make sure switch is in off position
before plugging in.
before plugging in.
17. USE RECOMMENDED ACCESSORIES.
Consult the owner's manual for recommended
accessories. The use of improper accessories
may cause risk of injury to persons.
accessories. The use of improper accessories
may cause risk of injury to persons.