Multiquip MVC-64E/EW ユーザーズマニュアル

Figure 3 shows the location of the components and general
maintenance parts.  The function of each component  is described
below:

1.

Water Tank Cap (for MVC-64EW only) – Remove this
cap to add water to the water  tank.

2.

Fuel Tank Cap – Remove this cap to add fuel.

3.

Lifting Bail – When lifting of the compactor is required
either by forklift, crane etc., tie rope or chain around this
lifting point.

4.

Handle Bar  – When operating the compactor use this
handle bar  to maneuver  the compactor.

5.

Gasoline Engine – This plate compactor uses a ROBIN
EX130D40040 ROBIN  engine. Refer to the ROBIN  owner's
manual for  engine information.

6.

Belt Cover – Remove this cover to gain access to the V-
belts. NEVER run the compactor without the V-belt cover. If
the V-belt cover is not installed, the possibility exist that
your hand may get caught between the V-belt and clutch,
thus causing serious injury and bodily harm.

7.

Vibrating Plate – A flat, open plate made of durable cast
iron construction used in the compacting of soil.

8.

Vibration Case – Encloses the eccentric, gears and
counter weights.

9.

Water Shut-Off Valve  (for MVC-64EW only) – Turn this
valve downward to let water flow from the water tank to the
water tube.

10. Water Tank   (for MVC-64EW only)  – Holds 10.6 quarts

(10 liters) of water, removable no tools required.